Author Topic: bow form rubber (Read 1325 times)

huntwithastick · « **on:** January 01, 2007, 07:31:00 PM »

Can anyone out there tell me what thickness rubber to use to line my bow form? I've previously used formica, but am going to try and use rubber. Is Old Master Crafters still the place to get it? Thanks.

Doug

Holm-Made · « **Reply #1 on:** January 01, 2007, 07:55:00 PM »

I use formica or fiberglass and some black rubber that I got from a roofing outfit. It's the stuff that they put on flat roofs. About 1/16" thick. Chad

Steve H. · « **Reply #2 on:** January 01, 2007, 11:38:00 PM »

I use 1/8".

OconeeDan · « **Reply #3 on:** January 02, 2007, 07:25:00 AM »

Educate me, why use rubber instead of fiberglass strip or formica strip?
Dan

shantam · « **Reply #4 on:** January 02, 2007, 08:12:00 AM »

to even out any uneven spots,i use bycicle tube with good results.
shantam

Tom Leemans · « **Reply #5 on:** January 02, 2007, 08:33:00 AM »

McMaster Carr carries rubber too. http://www.mcmaster.com/

News:

Author Topic: bow form rubber (Read 1325 times)

huntwithastick

bow form rubber

Holm-Made

Re: bow form rubber

Steve H.

Re: bow form rubber

OconeeDan

Re: bow form rubber

shantam

Re: bow form rubber

Tom Leemans

Re: bow form rubber

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS