Brass insert glue

[BowHuntingFool]

What does everyone use for gluing in their brass inserts! I tried to use Fletch Tight to no avail! Will duco work? Any tips or tricks are welcome!

Thanks guys and gals!

[fatman]

I use a gel cyanoacrylate (super glue)...I have to grind or scrape a busted shaft off the insert...

[Smallwood]

fletch tite and duco are for attatching fletching to your shafts.
for inserts-
use either a super glue type or a two part epoxy. also , j.b. weld works really well.
or you can just use the old standby, hot melt glue.

[fyrfyter43]

JB Weld

I had to remove an insert just the other night that was glued in with JB Weld. Took more than 30 good swings with a drill bit in the shaft.

[BowHuntingFool]

Thanks guys, I went and did the right thing and picked up some 2 part, is setting up now!

[BRONZ]

I went with 2 part epoxy after having no luck with hot melt.