3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: WINGNUTTERS!!!!!!!!!!  (Read 1010 times)

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5427
WINGNUTTERS!!!!!!!!!!
« on: February 22, 2007, 07:19:00 PM »
Everyone knows that a "wingnutter" is a bunny stoppin' son of a gun   :bigsmyl:

I was messing around in the "hardware" room at work last night and here's what I found out.....

If you take a 1 inch long #8-32 flat head screw,rub the threads full of bees wax,put that screw through a 5/16th wingnut,insert it into the threaded insert of your arrows and screw it down TIGHT!!!!!

OOOOOOOOOOHHHHHHHHHH YEAHHHHHHHHHH!!!!!!!!!!   :bigsmyl:

You've got yourself one "state of the art" bunny bustin' carbon "WINGNUTTER"!!!!!   :thumbsup:
Logged
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline whitebuffalo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2038
Re: WINGNUTTERS!!!!!!!!!!
« Reply #1 on: February 22, 2007, 07:30:00 PM »
Cool, I like it.
Logged
TGMM

Offline joe skipp

  • Trad Bowhunter
  • **
  • Posts: 4314
Re: WINGNUTTERS!!!!!!!!!!
« Reply #2 on: February 22, 2007, 07:34:00 PM »
Chuck...take some pictures of the entire process and post them. Sounds real good!   :thumbsup:
Logged
"Neal...is this heaven?" "No Piute but we are dam close". Top of the Mtn in Medicine Bow Nat Forest.

Offline bjk

  • Trad Bowhunter
  • **
  • Posts: 514
Re: WINGNUTTERS!!!!!!!!!!
« Reply #3 on: February 22, 2007, 07:37:00 PM »
Scott did something like that for the BH this past wknd up at Shawn's...things looked pretty cool...looked like they'd leave a mark, for sure    :thumbsup:
Logged

Offline wingnut

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 6179
Re: WINGNUTTERS!!!!!!!!!!
« Reply #4 on: February 22, 2007, 08:27:00 PM »
HEY HEY HEY!!!  Let's not be heating up wingnuts and screwing me on.  Dang that just ain't right.

LOL


I tried it and found that the shaft tended to break right behind the wingnut do to tourque.

Mike
Logged
Mike Westvang

Offline joe skipp

  • Trad Bowhunter
  • **
  • Posts: 4314
Re: WINGNUTTERS!!!!!!!!!!
« Reply #5 on: February 22, 2007, 08:30:00 PM »
Scott made those big washers with a wingnut. Check out the devasting hits I got on rabbits the other day..Pink = 2 Rabbits.

Those rabbits look like they got hit with hammers!
Logged
"Neal...is this heaven?" "No Piute but we are dam close". Top of the Mtn in Medicine Bow Nat Forest.

Offline Killdeer

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 9147
Re: WINGNUTTERS!!!!!!!!!!
« Reply #6 on: February 22, 2007, 08:31:00 PM »
Well, from what I read, you're not gonna get screwed up unless you are a 5/16" wingnut.
Still worried?  :saywhat:  
Killdeer  :D
Logged
Long, long afterward, in an oak I found the arrow, still unbroke;
And the song, from beginning to end, I found again in the heart of a friend.

~Longfellow

TGMM Family Of The Bow

Offline southpawshooter

  • Trad Bowhunter
  • **
  • Posts: 840
Re: WINGNUTTERS!!!!!!!!!!
« Reply #7 on: February 22, 2007, 08:43:00 PM »
Joe,

The head I made was like Chuck is describing -

8-32 x 1" pan head screw
Wingnut
Fender Washer
8-32 nut below washer to keep it all together

Comes out at 210 grains -perfect on a carbon

Works great in the deep snow with the washer - prevents from plowing too deep.
Logged
Scott F >>--->   @

"if the wood don't fly the bunny don't die" - Stone Knife, JLMBH 2008

Proud member of Team Pink

Offline bjk

  • Trad Bowhunter
  • **
  • Posts: 514
Re: WINGNUTTERS!!!!!!!!!!
« Reply #8 on: February 22, 2007, 08:57:00 PM »
What are you still doing up, Bro...it's after 8:30?
Logged

Offline southpawshooter

  • Trad Bowhunter
  • **
  • Posts: 840
Re: WINGNUTTERS!!!!!!!!!!
« Reply #9 on: February 22, 2007, 09:20:00 PM »
:rolleyes:
Logged
Scott F >>--->   @

"if the wood don't fly the bunny don't die" - Stone Knife, JLMBH 2008

Proud member of Team Pink

Offline Gil

  • Trad Bowhunter
  • **
  • Posts: 756
Re: WINGNUTTERS!!!!!!!!!!
« Reply #10 on: February 22, 2007, 11:47:00 PM »
Why not just glue the wing nut to a broadhead adapter, anyone tried this?

Gil
Logged
There's plenty of room for all of God's creatures.Right next to the mashed potatoes.

One can pay back the loan of gold, but one dies forever in debt to those who are kind."

COMPTON TRADITIONAL BOWHUNTERS

Offline Voodoofire1

  • Trad Bowhunter
  • **
  • Posts: 309
Re: WINGNUTTERS!!!!!!!!!!
« Reply #11 on: February 23, 2007, 02:18:00 AM »
I just put them under my target tips and blunts, I've never had one come off.

 
Logged
True happiness is not having what you want, it's wanting what you have!

Offline sticshooter

  • Trad Bowhunter
  • **
  • Posts: 4210
Re: WINGNUTTERS!!!!!!!!!!
« Reply #12 on: February 23, 2007, 05:42:00 AM »
Been making these since 2003. Work great with alum arrows and put the smack down on bushytails. They fly great they fly great even with that wingnut riding up front.<><
Logged
The Church of God is an anvil that has worn out many hammers.

"Walk softly..and carry a sharp   Stic."
TGMM

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: WINGNUTTERS!!!!!!!!!!
« Reply #13 on: February 23, 2007, 02:13:00 PM »
Hey Chuck,
Those were all I carried at the bunny hunt, wished you'd of seen 'em on Saturday. Darn, the sure made my carbons and aluminums fly well...

...course, wish I'd have connected on a bunny with one of 'em...  ;)
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©