3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Refurbished Ben Pearson Mustang  (Read 1471 times)

Offline V-Archer

  • Trad Bowhunter
  • **
  • Posts: 460
Refurbished Ben Pearson Mustang
« on: February 23, 2007, 05:55:00 AM »
Hi All,

I just finished a refurbish job on an "old and beaten" Ben Pearson Mustang recurve.
This one was not treated well over the years and I thought I’ll give it a try to give it a “second life”. I have added new tips to the limbs. The original Mustang does not have them, but I like it better this way. The results speak for themselves.

Some pictures have a different format, can't change that (yet)

 

 

 

 

 

 

 

Below the result of my effort.

 
Logged
"If you have the will to win you have achieved half your success; if you don't, you have achieved half your failure"

Offline Txjourneyman

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Refurbished Ben Pearson Mustang
« Reply #1 on: February 23, 2007, 07:58:00 AM »
Wow! Nice job!
Logged

Offline Deadsmple

  • Trad Bowhunter
  • **
  • Posts: 673
Re: Refurbished Ben Pearson Mustang
« Reply #2 on: February 23, 2007, 09:18:00 AM »
Awesome job. I think I have do something like that with an old Indian I have hanging around. Thanks for sharing.
Logged
All praise is the Lords


"to get to heaven, turn right and stay straight"

Offline Buemaker

  • Trad Bowhunter
  • **
  • Posts: 3108
Re: Refurbished Ben Pearson Mustang
« Reply #3 on: February 23, 2007, 09:48:00 AM »
Very nice, looks brand new.
Bue--.
Logged

Offline drewsbow

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 5902
Re: Refurbished Ben Pearson Mustang
« Reply #4 on: February 23, 2007, 10:31:00 AM »
Very nice work , looks great :0)
Logged
Try to be the person your dog thinks you are :0)
TGMM Family of the Bow
N.Y. Bowhunters member
BigJim 3 pc buffalo 48@28
BigJim thunderchild 55@31
BigJim thunderchild 55@32 Jim's bow

Offline bbassi

  • Trad Bowhunter
  • **
  • Posts: 1160
Re: Refurbished Ben Pearson Mustang
« Reply #5 on: February 23, 2007, 05:34:00 PM »
Looks better than new. Beautiful job. One of a kind I'm sure. What did you use for your "snake skins"?
Logged
Cum catapultae proscriptae erunt tum soli proscripti catapultas habebunt.

Offline elk ninja

  • Trad Bowhunter
  • **
  • Posts: 1024
Re: Refurbished Ben Pearson Mustang
« Reply #6 on: February 23, 2007, 05:38:00 PM »
You have inspired me, I may do this with an old "Black Bear" I have!
Logged
>>>--Semper-Fi--->

It is better to remain silent and be thought a fool than to open one's mouth and remove all doubt.
-Abraham Lincoln

Offline V-Archer

  • Trad Bowhunter
  • **
  • Posts: 460
Re: Refurbished Ben Pearson Mustang
« Reply #7 on: February 23, 2007, 05:43:00 PM »
It's a snake skin pattern printed on a linen or fabric strip and I got it from Rudderbows.
When applying (thin) epoxy glue it comes out very nice. I used it already on several bows that I refurbished.
Logged
"If you have the will to win you have achieved half your success; if you don't, you have achieved half your failure"

Offline bayoulongbowman

  • Trad Bowhunter
  • **
  • Posts: 3765
Re: Refurbished Ben Pearson Mustang
« Reply #8 on: February 23, 2007, 05:59:00 PM »
I have a bow like that , cool!!!!!!!!!!
Logged
"If you're living your life as if there is no GOD, you had  better be right!"

Offline BigRonHuntAlot

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3189
Re: Refurbished Ben Pearson Mustang
« Reply #9 on: February 23, 2007, 06:11:00 PM »
Congrats on a Great Job  :thumbsup:
Logged
>>>-TGMM Family Of The Bow-->

The Moon Gave Us The Bow, The Sun Gave Us The Arrow

Walk Softly and Carry a Big Stick

Offline Van/TX

  • Trad Bowhunter
  • **
  • Posts: 1216
Re: Refurbished Ben Pearson Mustang
« Reply #10 on: February 23, 2007, 09:33:00 PM »
That is so cool V-Archer.  Reviving those old bows just does my heart good  :wavey:    :thumbsup:    :thumbsup:  ...Van
Logged
Retired USAF (1966 - 1989)
Retired DoD Civilian (1989 - 2009)
And drawing Social Security!
I love this country ;-)

Offline cajunbowhntr

  • Trad Bowhunter
  • **
  • Posts: 154
Re: Refurbished Ben Pearson Mustang
« Reply #11 on: February 24, 2007, 01:30:00 AM »
What grit(s) sandpaper did you use for the sanding? I've allways been worried about sanding thru the glass.


CB
Logged
"Forget your lust for the rich mans gold all that you need is in your soul...Find a woman and you'll find love and don't forget son,there is someone up above...Ronnie Van Zant "simple man"

Offline Guru

  • Trad Bowhunter
  • **
  • Posts: 11447
Re: Refurbished Ben Pearson Mustang
« Reply #12 on: February 24, 2007, 05:37:00 AM »
Very,Very nice work    :thumbsup:    :thumbsup:

What did you use for the spray on finish??
Logged
Curt } >>--->   

"I love you Daddy".......My son Cade while stump shooting  3/19/06

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Refurbished Ben Pearson Mustang
« Reply #13 on: February 24, 2007, 07:36:00 AM »
That is very nice looking.
Cajun, it's not easy to sand through glass, it's tough stuff.  At least that has been my experience.  
Dan
Logged

Offline V-Archer

  • Trad Bowhunter
  • **
  • Posts: 460
Re: Refurbished Ben Pearson Mustang
« Reply #14 on: February 24, 2007, 08:04:00 AM »
Cajun,

Depends on how the condition of the original finish is. In this case I had to use 40 grit first to get it all off as the original finish was damaged and came off at various spots. This was not clear in the pictures. I took really good care sanding the limbs with 40 grit without "eating" the glass. (normally I start with 100 grit)
Then I used 100 grit to sand it evenly. Then I glued the snake skins, tips and overlays and  sanded the tips and overlays with 100 grit after shaping them. Then I used a heavy duty scouring pad from Scotch 3M for polishing the surface of the bow grip and limbs. You can use steelwool as well for the job, but my experience is that the metal color rubbs off onto the light surfaces.
This gave already a nice "shine" on the entire bow.
Ensure to wear a goggle and a mouth/nose protective mask as the glass fibre dust is nasty stuff!

Guru,
I sprayed the bow 3 times with a clear lacquer from an automotive shop (can). This is a very durable and strong coating, at least that's my experience. I can spray 3 bows with one can.

Thanks guys for the positive replies.

Arnold
V-Archer
Logged
"If you have the will to win you have achieved half your success; if you don't, you have achieved half your failure"

Offline bentpole

  • Trad Bowhunter
  • **
  • Posts: 5104
Re: Refurbished Ben Pearson Mustang
« Reply #15 on: February 24, 2007, 08:46:00 AM »
Great job! The bow looks like a Super high priced custom bow now!!
Logged

Offline V-Archer

  • Trad Bowhunter
  • **
  • Posts: 460
Re: Refurbished Ben Pearson Mustang
« Reply #16 on: February 25, 2007, 09:11:00 AM »
What would you guys estimate for a fair selling price for this refurbished bow?
Would it be re-saleable in the US?
Logged
"If you have the will to win you have achieved half your success; if you don't, you have achieved half your failure"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©