3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Easton Axis 400 arrows  (Read 252 times)

Offline carparcher

  • Trad Bowhunter
  • **
  • Posts: 213
Easton Axis 400 arrows
« on: September 09, 2008, 10:07:00 PM »
Anyone out there hunt w/ these shafts?  They fly fantastic, but are only 9 gr/inch.  I bought some weight tubes, but the arrows don't seem to fly that well w/ them inside.  Anyone had any success/lack of success using them?  I know Fred Eichler has seemed to do well w/ them in his videos, but I don't know if he is adding anything to the shafts for weight.

Offline limbow

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1200
Re: Easton Axis 400 arrows
« Reply #1 on: September 09, 2008, 10:10:00 PM »
100 grn brass inserts from 3 Rivers. I use them and they are deadly accurate. Also use the Axis 500 for my lighter weight bows.
Kevin Osworth
->>>--TGMM Family of the Bow-->

Online Steve O

  • Trad Bowhunter
  • **
  • Posts: 5311
Re: Easton Axis 400 arrows
« Reply #2 on: September 09, 2008, 10:16:00 PM »
If you want more weight, you could go with the FMJs or the Beman MFX Classics (woodgrain)...they are about 10.5 in the 400s, but it isn't going to amount to a hill of beans...30 grains is five $1 bills stacked together.  You are fine.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Easton Axis 400 arrows
« Reply #3 on: September 09, 2008, 10:54:00 PM »
I shoot Beman MFX Classic 400's(10.4 gpi) out of a couple of my bows.At 29.5",with 100 gr.insert,wraps and 3 fletch they weigh 560 grs. with a 125 gr. point and 585 with a 145 gr. point.

Offline Dawn Patrol

  • Trad Bowhunter
  • **
  • Posts: 134
Re: Easton Axis 400 arrows
« Reply #4 on: September 10, 2008, 12:36:00 AM »
Like limbow I use the 400 with a 100 grain insert and a 175 broadhead and they fly great. My finished arrow is 515 grains.
I put the "stink" in instinctive archery!

Offline FerretWYO

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5099
Re: Easton Axis 400 arrows
« Reply #5 on: September 10, 2008, 12:42:00 AM »
I am shooting the Axis FMJ 340's out of my 57 lbs ferret. I use a 100 grain insert as limbow said from 3rivers. They are coming out to weigh 600gr almost exactly. I have a ACS CX that I just tuned up some 400s for and it loves them. I dont remember the weight that I had on those though. I had to keep them a little longer than I might have wanted but they fly like darts. I have not have any problems with  they seem to be tough as rocks. I have shot one or two rocks and they lived.

They are a little pricy though.

I know that Fred Eichler does use a 100 grain muzzy brass insert sometime. I think it was his polar bear where he is showing them on the video. He is the one that talked me into the FMJs.
TGMM Family of The Bow

Offline foxbo

  • Trad Bowhunter
  • **
  • Posts: 667
Re: Easton Axis 400 arrows
« Reply #6 on: September 10, 2008, 05:35:00 AM »
My 400s with brass insert, 100 grain broadhead adaptor and the 125 Ace head weigh in at 660 grains. I also have some with the aluminum adaptor and I think they weigh in at 571, including broadhead. I like the heavier ones best.
N/A

Offline J-dog

  • Trad Bowhunter
  • **
  • Posts: 2006
Re: Easton Axis 400 arrows
« Reply #7 on: September 10, 2008, 09:37:00 AM »
Had the same problem, they hate weight tubes I think. I just shoot without them, I have 260 up front and get great flight. Not quite the weight I want but they are flying good so I am leaving well enough alone. I literally tried everything before determining it was weight tubes causing bad flight. I shotting 55# 64" silvertip recurve if that matters.

Jason
Always be stubborn.

Captain hindsight to the rescue!

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©