BH question?

[Bill Tell]

When you mesure for brace hight were on the bow do you mesure to?  From string to shelf or grip or low part of grip....

[BillyBobHowdieVern]

i mesure from the deepest part of the grip to the string.

[formerbutcher]

Bill, I don't think it really matters as long as you measure it in the same place every time.

I measure mine to the deepest part of the grip.

FB

[ChuckC]

Wm.  unless you are comparing it to someone else's measurement, it really doesn't matter as long as you do it the same each time.  That said, I BELIEVE the typical way is to the deepest part of the grip.
ChuckC

[Bill Tell]

Thanks everyone.  I have a 60" Morrison Cougar and the BH is supposed to be 6 and 5/8ths to 7 and 1/4.  Right now if I measure to the shelf it is 7 and 1/4.  I am thinking that the sting is twisted way to short and that I should let it out and start at the 6 and 5/8th at the deepest part of the grip and tune it up.

[Carbon Caster]

Yep, that would make it too high that way.  The spec recommended is to the deepest part of the grip.

[SpikeMaster]

Deepest part of the grip.

[katman]

As said deppest part of the grip is the standard, Bill shoot whatever brace height the bow performs best, the recomended height is a good starting point.