I've had two stands of the same brand that sound like what you want. I think they were by rivers edge and called the "outfitters edge" model but I'm not 100% sure of that.
Anyway, these are steel stands so they are very strong but not as light as some.
They chain on to the tree so they are very strong that way too.
Lastly, they don't even HAVE the cables to hold the stand up. Instead, they have a reinforcing fram on the bottom of the stand with two large spikes (about 1 inch). The stand gets put on the tree in the "up" position with the chain around the trunk. You take out as much slack as you can but then you let the stand slip down the trunk to take out the rest. Then, you pull the stand down to horizontal and the shape makes it cam tight to the trunk. The two spikes (maybe it was four?)dig in and it locks up REAL tight. It's the only stand I've used where I could stand out on the side edges or corners and bounce up and down and it never slipped or came loose. Plus, the lack of cables greatly increased your usable platform space. I think they cost me about 40 bucks back about 8 years ago. Both have been since stolen which is why I'm kinda fuzzy on the details.
My favorite stand I use now is my Non Typical Patriot hand on.
p.s. (edit)
I've done a bunch of googling and all i can say is evidently it was NOT a Rivers Edge stand but I know that the model was Outfitters Edge. Didn't have any luck finding it. Sure was a rock solid stand.