3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Old 1916's or 2020's???  (Read 1046 times)

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Old 1916's or 2020's???
« on: March 06, 2007, 04:43:00 PM »
Does anyone have some damaged 1916's or 2020's lying around that they don't use anymore? I'm throwing together some Axis 400's, and I need some aluminums in these sizes for footings. It could really help me out if someone could sent some shafts of these sizes to me if they're no longer shootable. Thanks...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline bjk

  • Trad Bowhunter
  • **
  • Posts: 514
Re: Old 1916's or 2020's???
« Reply #1 on: March 06, 2007, 04:55:00 PM »
I don't have any, but do have a tip...stick with 2020's...2"s on front...they'll be bomb proof.
Logged

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Old 1916's or 2020's???
« Reply #2 on: March 06, 2007, 05:01:00 PM »
I'd imagine they'd make a considerably tougher footing than the 1916, but I'll take what I can get. Besides, I figure there are more bent & broken 1916's out there then there are 2020's...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5435
Re: Old 1916's or 2020's???
« Reply #3 on: March 06, 2007, 05:27:00 PM »
I think I have a few 1916 Gamegetters laying around,can't garranty how straight they are though. I'll look around and see what I can find.
Logged
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Old 1916's or 2020's???
« Reply #4 on: March 06, 2007, 05:33:00 PM »
Thanks Chuck. Bent would be better, seeing as I only need two inches for each footing, and I don't want to take any good, usable arrows away from someone...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2868
Re: Old 1916's or 2020's???
« Reply #5 on: March 06, 2007, 06:49:00 PM »
With the 1" or 2" footing, do you have to leave your arrows 1" to 2" longer? Alan
Logged

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Old 1916's or 2020's???
« Reply #6 on: March 06, 2007, 06:58:00 PM »
No, all I do is slip the footing over the front of my average-lengthed arrows...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline Jaeger

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 202
Re: Old 1916's or 2020's???
« Reply #7 on: March 06, 2007, 07:03:00 PM »
I don't think 1916s will work for 400 shafts. They are perfect for the 500s (it's what I use) but I think the ID is too small for the 400s. I don't know about the 2020s.
You better double check the chart.
Logged
TGMM Family of the Bow
United Bowhunters of PA

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Old 1916's or 2020's???
« Reply #8 on: March 06, 2007, 07:26:00 PM »
Actually, since I had 2 1916 shaft's lying around last year, I made a few sets of Axis 400's footed with the 1916's. Actually, I wanna take this moment to thank ya', Jaeger, cause I got the idea of footing carbons from you. Thanks man...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline Jaeger

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 202
Re: Old 1916's or 2020's???
« Reply #9 on: March 07, 2007, 01:20:00 PM »
You are welcome. Unfortunately I cannot take the credit. The idea came from David Sosa (DAS Kinetics)
I'm suprised those worked for you. I tried to slip fit some 1916 pieces on a 400 Beman Black Max and it wouldn't fit. Go figure!  :)
Logged
TGMM Family of the Bow
United Bowhunters of PA

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Old 1916's or 2020's???
« Reply #10 on: March 07, 2007, 01:34:00 PM »
They're probably alot harder to get on the 400's than the 500's, but they work, and without removing material from the shaft. Was surpirised myself, but you can't argue with results, I guess...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline bjk

  • Trad Bowhunter
  • **
  • Posts: 514
Re: Old 1916's or 2020's???
« Reply #11 on: March 07, 2007, 02:08:00 PM »
The Beman OD might be a tad fatter...I know the the weight is different and believe it to be because of the thicker wall...HIT still works so it jives that the 1916 might just miss due to larger OD...on the BM
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©