3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: String Noise  (Read 317 times)

Offline Big Fisherman

  • Trad Bowhunter
  • **
  • Posts: 79
String Noise
« on: January 19, 2009, 12:31:00 PM »
I have a FF String on a 60", 40# recurve. I had nock stopper made of string on it. As time went by, the string stopper came loose and since there was an occasional high arrow, I replaced it with two metal stoppers. This stopped the high arrows, but the bow really got noisy at the end of the upper limb. Is this normal?  The upper nock stop is exactly where the string one was.  Thanks for the help.
Logged

Offline Big Fisherman

  • Trad Bowhunter
  • **
  • Posts: 79
Re: String Noise
« Reply #1 on: January 21, 2009, 09:04:00 AM »
Thanks for no response.
Logged

Offline Gil

  • Trad Bowhunter
  • **
  • Posts: 756
Re: String Noise
« Reply #2 on: January 21, 2009, 09:14:00 AM »
The metal nocking points are heavier then the string ones and must have caused the string to vibrate or resonate more.Just try to learn to make sting nocking points and try it again.
Gil
Logged
There's plenty of room for all of God's creatures.Right next to the mashed potatoes.

One can pay back the loan of gold, but one dies forever in debt to those who are kind."

COMPTON TRADITIONAL BOWHUNTERS

Offline BobW

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2318
Re: String Noise
« Reply #3 on: January 21, 2009, 09:19:00 AM »
do you have any string silencers on your set-up?  If no, then consider them, if yes, consider moving them....
Logged
"A sagittis hungarorum libera nos Domine"
>>---TGMM-Family-of-the-Bow--->
Member: Double-T Archery Club, Amherst, NY
St. Judes - $100k for 2010 - WE DID IT!!!!

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: String Noise
« Reply #4 on: January 21, 2009, 09:25:00 AM »
I like to use bow hush and hush puppys for my recurves.I think they do an excellent job for recurves in silencing them.
Logged

Offline Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8237
Re: String Noise
« Reply #5 on: January 21, 2009, 09:27:00 AM »
I'm with BowW on this one.

Also remember patience is a good thing.
Logged
Hunt Sharp

Charlie

Offline Guru

  • Trad Bowhunter
  • **
  • Posts: 11447
Re: String Noise
« Reply #6 on: January 21, 2009, 10:17:00 AM »
Sarcasm won't help with your problem, and certainly won't make guys want to help you....like Charlie said "patience"....

You've gotten some very good ideas to try now....
Logged
Curt } >>--->   

"I love you Daddy".......My son Cade while stump shooting  3/19/06

Offline HATCHCHASER

  • Trad Bowhunter
  • **
  • Posts: 1215
Re: String Noise
« Reply #7 on: January 21, 2009, 10:22:00 AM »
Good advice Guru.  Also to add I would play with the brace height.
Logged
It's not the arrival, it's the journey.

Offline john fletch

  • Trad Bowhunter
  • **
  • Posts: 229
Re: String Noise
« Reply #8 on: January 21, 2009, 10:51:00 AM »
I have got to work on that too!

I have brush buttons and cat whiskers on both the longbow and Browning Explorer II.  One day I actually had a 35 yard shot with the explorer jusr beyond the back fence.  Three big does were looking right at me.  I had a good shot at the leas, but on the release, she jumped the string and the arrow went right behind her.  She had cleared about 5 feet in one hop.

I will work on the noise, but I think the trick is going to be the tree stand so I can get a shot without them knowing right where I am standing.

Any hints appreciated.
Logged
Instructor BSA NCS certified

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: String Noise
« Reply #9 on: January 21, 2009, 10:58:00 AM »
Lose the brush buttons from the longbow. Add weight and noise you don't need. Try placing the whiskers at the 1/4s and adjust from there. Check your brace height. As little as a 1/16th of an inch can make a big difference on some bows. Put some Bow Hush on the recurve(I'd lose the buttons on that two myself, for the little they do they aren't worth it in my experience and they add a lot of weight and limb contact to the string).
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Big Fisherman

  • Trad Bowhunter
  • **
  • Posts: 79
Re: String Noise
« Reply #10 on: January 21, 2009, 10:58:00 AM »
Thanks for the advice.
Logged

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: String Noise
« Reply #11 on: January 21, 2009, 10:59:00 AM »
BF what weight arrows are you shooting? A heavier arrow helps absorb excess energy and quiets a bow also.
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline JOKER

  • Trad Bowhunter
  • **
  • Posts: 172
Re: String Noise
« Reply #12 on: January 21, 2009, 11:00:00 AM »
A drop of super glue will keep the string knock from moveing. The best thing I did for string noise on my recurve was to make an 8 strand 8125 string for it. Steve
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©