3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 3 piece Recurve vs 1 piece  (Read 939 times)

Offline Black Gold

  • Trad Bowhunter
  • **
  • Posts: 126
3 piece Recurve vs 1 piece
« on: March 15, 2007, 03:07:00 PM »
Other than the ability to change weight w/ diff limbs what is the benefit of 3 piece vs 1 piece....or is it just personal preference?

Be easy on a new TB'r!
Cody Weiser

Offline bowdude

  • Trad Bowhunter
  • **
  • Posts: 576
Re: 3 piece Recurve vs 1 piece
« Reply #1 on: March 15, 2007, 03:17:00 PM »
Packability and generally a tad heavier making it more stable on a shot.

Offline last arrow

  • Trad Bowhunter
  • **
  • Posts: 792
Re: 3 piece Recurve vs 1 piece
« Reply #2 on: March 15, 2007, 09:24:00 PM »
Having lived through a split limb with a 1 piece that rendered the best fitting handle I have had worthless, I would recommend a three piece so that if a limb breaks, it can be replace.  You hear a lot about broken limbs, but rarely a broken handle.
"all knowledge is good. All knowledge opens doors. Ignorance is what closes them." Louis M. Profeta MD

"We must learn to see and accept the whole truth, not just the parts we like." - Anne-Marie Slaughter

Michigan Traditional Bowhunters
TGMM "Family of the Bow"

Offline Tbilisi

  • Trad Bowhunter
  • **
  • Posts: 90
Re: 3 piece Recurve vs 1 piece
« Reply #3 on: March 16, 2007, 01:11:00 AM »
I prefer a one piece for feel but, traveling makes it difficult so I travel with a three piece.
Life is short.  Shoot the good arrows first.

Offline JL

  • Trad Bowhunter
  • **
  • Posts: 725
Re: 3 piece Recurve vs 1 piece
« Reply #4 on: March 16, 2007, 08:32:00 AM »
Hey Cody!

The TD bow was originally designed so it could be broke down, carried in a pack into the deep woods, on a airplane ect, then easily put back together for hunting. There are several TD design's out there and the Bear TD design is probably the best known. One of my TD's have limb bolts made out of antler burrs so I can put the bow together without the use of any tools. The risers in TD bows tend to be beefier because of the internal hardware they carry, hence the more bow weight and considered a more stable shooting bow. The TD bow also gives you the option to add different length or weighted limbs while using the same familiar riser. It is my prefered type of bow design because of the different options it offers.

Welcome aboard!

JL
Practice like you are the worst, shoot like you are the best...

Offline R H Clark

  • Trad Bowhunter
  • **
  • Posts: 1089
Re: 3 piece Recurve vs 1 piece
« Reply #5 on: March 16, 2007, 05:06:00 PM »
Personally I would get a two bolt TD bow like the Bob Lee. I know of a guy that lost an eye whan an insert failed. I know it is rare but they have been some cases.I've never heard of a two bolt failing.

Offline Seeking Trad Deer

  • Trad Bowhunter
  • **
  • Posts: 885
Re: 3 piece Recurve vs 1 piece
« Reply #6 on: March 16, 2007, 05:50:00 PM »
I've seen takedowns with cracked risers but never a one piece with a cracked riser.
The Lord is my Shepherd

Offline Tom Uselding

  • Trad Bowhunter
  • **
  • Posts: 29
Re: 3 piece Recurve vs 1 piece
« Reply #7 on: March 17, 2007, 04:31:00 PM »
I have a few 1 piece bows and one TD's.  I see no advantage in performance with a TD vs a 1 piece.  The difference is my TD's is custom made (whatever that means) and I have three different sets of limbs for it.  Some faster, some slower.  Just different poundage limbs.

One of the things I like about my one piece bows is that they are all lighter than my TD.  But my weapon of choice is my TD.  It's custom made (whatever that means).  Maybe I use it more because it cost so much.
Therefore if any man be in Christ, he is a new creature; old things are passed away; behold, all things are become new.  Semper Fi - Tom

Offline Mark Trego

  • Trad Bowhunter
  • **
  • Posts: 74
Re: 3 piece Recurve vs 1 piece
« Reply #8 on: March 17, 2007, 05:15:00 PM »
I think a one piece has smoother lines, better looking.Take downs are handy to travel with but for the most part they are always screwed together.
" It's Five O'Clock Somewhere"

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: 3 piece Recurve vs 1 piece
« Reply #9 on: March 17, 2007, 06:23:00 PM »
i like t/d recurves they are so veristile take em any where with out the hassle of snapping off a tip putting it in the car. good stuff
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©