I Need arrows for my Bear Grizzly, What size?

[david janssen]

I have a 45# Bear Grizzly and I draw 26". I would like to shoot 125 gr. stingers with this bow.I only draw 26" I was wondering what size arrows to start out with.

Alluminum:

Carbon:

Thanks for all the help,

David

[shortstroke 91]

I'd try 1916 on aluminum, start @ full length and cut if you can. My grizzly likes gold tip entrada 600 @ 28.5" but I have 225 grains up front to get them to fly right.

[George D. Stout]

The 1916 should work fine if you let them  29 inches long.  Most carbons will be much too stiff with 125 grain heads unless full length...over 30 inches.  I would try 1916 and let them 29" because you are only pulling around 39 or 40 pounds.  An 1816 should work at 28".

[david janssen]

Thanks for the advice,

David

[Shawn Leonard]

GT Entrada with 125 grain point cut to 29"s should fly well as you are only pulling 39#s or so, ya may even have to shoot a bit more point weight. 1816 if ya can find them cut to 28 or 29"s. Shawn

[jacobsladder]

carbon express terminator jrs..they are .628 spine ....come 28" long and are a good little arrow...you'll only be shooting around 400 grains with 175 up front......