11/32 instead of 5/16 I think I messed up

[NewtoTrad2008]

I bought some 11/32 Zwickey Black Diamond glue on broadheads and the matching screw in adapters, I tried a dry fit on my Heritage 150's and they are a little wide. I am assuming I should have picked up the 5/16ths but they didn't have any at the local shop. Will it make a difference if I use the 11/32 or should I get the 5/16?

[wharvey]

It is my understanding that if the shaft is smaller than the broadhead you get better penetration.

[Jason R. Wesbrock]

Matt,

It doesn't make a lick of difference. I'd wager that most guys (myself included) who use 5/16" shafts use 11/32" broadheads.

[Fletcher]

I use 11/32 heads on 5/16 woods all the time.  Works great and makes for less breakage at the head.

[Buckeye Trad Hunter]

If the point is bigger than the shaft you're okay.  What you don't want is the shaft to be bigger than the point.

[Orion]

The 11/32 heads are also bigger and heavier than the 5/16 heads.  I consider that a plus.

[Boneyard Bowhunter]

You can grind off some of the end that goes on the shaft and it will fit better.