i'm currently in Eukey (just a small locality out of town) where i grew up. it is 16km south of stanthorpe which is about 300km southwest of brisbane, queensland. lots of rabbits here. up north where you were there is hardly any rabbits. there's many other critters up north to hunt as you know. i'm just about to move to gove in the NT. hopefully lots of buffulo hunting.
matebele- this is my arrow setup....
75/95 g/tip, 100gr insert, 250gr b/head, and a 'special' weight tube setup. just behind the insert there is a piece of the white 8gr/" tube inside of which is a piece of 4mm diameter welding rod with the flux taken off. 4mm rod fits nicely inside this white tube. this part weighs 65gr. behind that the rest of the shaft is filled with the black 3gr/" tube. total weight of arrow is 790gr. i'm going to put a small aluminium footing on soon just to reinforce that area.
my bow is shooting these at 165fps at the bow with dacron. i'm thinking of changing to D97, so that may go up tp 170fps. you do the math.
this is my blunt.
it is a chipboard faster with the female threaded part drilled out. they go behind a field point, much the same as an adder point. a bit of rip and tear as well as shock.