3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Bear 8.5mm Metric Hunters  (Read 993 times)

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Bear 8.5mm Metric Hunters
« on: March 28, 2007, 09:58:00 PM »
Well, I was lucky enough to recieve a set of old Bear 8.5mm Metric Hunter aluminum arrows. Course, I know these things are before my time, so I was wondering if anyone here had info on em.
 I mean anything would help. Spine, gpi, or what I'm most curious about; what modern shaft size compares closely to it. Heck, if ya have any good experiances with em, well, I'd like to hear them, too!
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline katman

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3574
Re: Bear 8.5mm Metric Hunters
« Reply #1 on: March 28, 2007, 10:07:00 PM »
Took my first whitetail with a bear metric hunter arrow in 1980, new nothing about tuning, heck did not even have a nock point but could group pretty good at 15 yds eyeballing it, I just  needed to hunt. The saying even a blind squirel finds an acorn once in a while applied, the doe went 75yds. Thanks for letting me remember my most memorable hunt.
Logged
shoot straight shoot often

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Bear 8.5mm Metric Hunters
« Reply #2 on: March 28, 2007, 10:13:00 PM »
No problem...gotta remember the good ones every now and again...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline Snakeeater

  • Trad Bowhunter
  • **
  • Posts: 583
Re: Bear 8.5mm Metric Hunters
« Reply #3 on: March 28, 2007, 10:23:00 PM »
It is a 2117.
Logged
Larry Schwartz, Annapolis, Maryland

Do yourself a favor and join your state bowhunting organization!

Professional Bowhunters Society
Traditional Bowhunters of Maryland
Maryland Bowhunters Society
National Rifle Association

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Bear 8.5mm Metric Hunters
« Reply #4 on: March 28, 2007, 10:26:00 PM »
Thanks, Snakeeater...
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline loco_cacahuate

  • Trad Bowhunter
  • **
  • Posts: 209
Re: Bear 8.5mm Metric Hunters
« Reply #5 on: March 28, 2007, 10:52:00 PM »
I used the 8.6's back when I was a compound shooter. at about 65#. Those things always flew great for me and a tough shaft as much as i put them thru, got my first bowkill with em.  :bigsmyl:
Logged
Never drop your gun to hug a Grizzly.

Offline SERGIO VENNERI

  • Trad Bowhunter
  • **
  • Posts: 1306
Re: Bear 8.5mm Metric Hunters
« Reply #6 on: March 29, 2007, 08:51:00 AM »
Chris; Snakeeater is right ,spines about like a 2117, also I believe the 2117 Broadhead adapters fit. they were made from easton'sX7 shaft material if i remember correctly and are very tough,they would rather break than bend.
Logged

Offline Jon Stewart

  • Trad Bowhunter
  • **
  • Posts: 2567
Re: Bear 8.5mm Metric Hunters
« Reply #7 on: March 29, 2007, 09:22:00 AM »
I still have a few of the metrics. Like Sergio said, they seem to be a little brittle much like the X-7's.
Logged

Offline joe skipp

  • Trad Bowhunter
  • **
  • Posts: 4314
Re: Bear 8.5mm Metric Hunters
« Reply #8 on: March 29, 2007, 06:24:00 PM »
I have a bunch of Metric Mags 8.6...they spine out to a 2413, take a standard 2117 insert. X7 shafting, Bronze color. Very tough and durable shaft. Price is $35 per doz
Logged
"Neal...is this heaven?" "No Piute but we are dam close". Top of the Mtn in Medicine Bow Nat Forest.

Offline SCATTERSHOT

  • Trad Bowhunter
  • **
  • Posts: 1460
Re: Bear 8.5mm Metric Hunters
« Reply #9 on: March 29, 2007, 10:16:00 PM »
I have some old Bear Metric Magnums, but they are called .315. Is this a different series, and what does the number mean? They spine like 2018's, and that's how I use 'em. Same diameter, too. Any info on these?

Thanks
Logged
"Experience is a series of non - fatal mistakes."

Offline Bowspirit

  • Trad Bowhunter
  • **
  • Posts: 1776
Re: Bear 8.5mm Metric Hunters
« Reply #10 on: March 29, 2007, 10:20:00 PM »
Could it be the O.D.?
Logged
“I read somewhere of how important it is in life, not necessarily to be strong, but to feel strong. To measure yourself at least once.”
                -Alexander Supertramp

"Shoot this for me."
                -Chuck Nelson

Offline SCATTERSHOT

  • Trad Bowhunter
  • **
  • Posts: 1460
Re: Bear 8.5mm Metric Hunters
« Reply #11 on: March 30, 2007, 11:28:00 AM »
Good thought, I'll check it out. If it's a decimal value, though, I wonder whay they call them .315? Seems like it would be xx millimeters or something.
Logged
"Experience is a series of non - fatal mistakes."

Offline SCATTERSHOT

  • Trad Bowhunter
  • **
  • Posts: 1460
Re: Bear 8.5mm Metric Hunters
« Reply #12 on: March 30, 2007, 01:35:00 PM »
Well, DUH! I just looked again at the arrows, and they say Magnum .316, not Metric Magnum. I've had these for years, you'd think I would look at them, wouldn't you? Anyway, they mic at .316, as advertised. A little bigger than a 2018, at .313.

Another mystery solved!
Logged
"Experience is a series of non - fatal mistakes."

Offline Van/TX

  • Trad Bowhunter
  • **
  • Posts: 1216
Re: Bear 8.5mm Metric Hunters
« Reply #13 on: March 31, 2007, 10:33:00 AM »
I have a few 8.4mm Metric Magnums that equate to a 2115.  They spine about 67#'s and are Easton X-7 quality.  So Snakeeater should be correct about the 8.5 size...Van
Logged
Retired USAF (1966 - 1989)
Retired DoD Civilian (1989 - 2009)
And drawing Social Security!
I love this country ;-)

Offline fflintlock

  • Trad Bowhunter
  • **
  • Posts: 209
Re: Bear 8.5mm Metric Hunters
« Reply #14 on: March 31, 2007, 10:53:00 AM »
I have some 8.5 mm nocks, wonder if that's what there for ?
 I don't even remember where I got them, but I've had them for awhile.
 I think I have about 20 of them, the're black, if anyone wants them PM me your addy and you can have them.
Jerald
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©