3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Can grip design help alleviate joint issues?  (Read 713 times)

Offline buckeye_hunter

  • Trad Bowhunter
  • **
  • Posts: 2982
Can grip design help alleviate joint issues?
« on: August 02, 2009, 04:18:00 PM »
I used to shoot a longbow with a flat style grip. While shooting it I developed tendonitis in my elbow. I noticed since I started shooting a recurve with a medium/high grip, my elbow tendonitis issues are gone. This is without physical therapy or anything else. It seems like a more ergonomic or "natural" hand position.

Any input or anyone else notice this?

-Charlie

Offline Jmatt1957

  • Trad Bowhunter
  • **
  • Posts: 699
Re: Can grip design help alleviate joint issues?
« Reply #1 on: August 02, 2009, 04:54:00 PM »
Charlie  I also have (had) tendonitis in my elbow of my bow arm. I have always been a recurve shooter. I switched to a long bow and saw no difference. Ended up getting a quartizone shot, also was taking 600mg ibprofin a day for about 2 weeks. That was a month ago no problems since wish I would have gone to the Dr. a year ago.   Jim

Offline Elk whisperer

  • Trad Bowhunter
  • **
  • Posts: 285
Re: Can grip design help alleviate joint issues?
« Reply #2 on: August 02, 2009, 09:03:00 PM »
In my experience the grip matters. My elbow hurts with a straight grip and is relieved with a locator grip.
The older I get the better I was

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: Can grip design help alleviate joint issues?
« Reply #3 on: August 03, 2009, 08:39:00 AM »
For those of you who have similar problems there is a new treatment for tennis elbow....PRP treatment. The link is to an article which I believe is in the NY times. May be worth it to see if it is available in your area.

 http://www.nytimes.com/2009/02/17/sports/17blood.html?_r=1&scp=2&sq=prp&st=cse
The best things in life....aren't things!

Offline buckeye_hunter

  • Trad Bowhunter
  • **
  • Posts: 2982
Re: Can grip design help alleviate joint issues?
« Reply #4 on: August 03, 2009, 08:45:00 AM »
Great article! I'll have to keep an eye out for this.

Thanks,
-Charlie

Offline James Wrenn

  • Trad Bowhunter
  • **
  • Posts: 1933
Re: Can grip design help alleviate joint issues?
« Reply #5 on: August 03, 2009, 08:47:00 AM »
Yes grip matters.That is why there are so many replacment grips for ilf risers.Find what works for you and it will help you stay pain free.
....Quality deer management means shooting them before they get tough....

Offline Don Stokes

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2607
Re: Can grip design help alleviate joint issues?
« Reply #6 on: August 03, 2009, 08:56:00 AM »
It affects my shoulder muscles. For me, the grip definitely makes a difference.
Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety.- Ben Franklin

Offline GINKSTER

  • Trad Bowhunter
  • **
  • Posts: 56
Re: Can grip design help alleviate joint issues?
« Reply #7 on: August 03, 2009, 03:23:00 PM »
It matters to me. I can't shoot low or high grips. It kills my elbow and wrist if I shoot more than 40 or 50 arrows in a short period so I shoot the medium grips on all my bows.

Offline buckeye_hunter

  • Trad Bowhunter
  • **
  • Posts: 2982
Re: Can grip design help alleviate joint issues?
« Reply #8 on: August 03, 2009, 05:18:00 PM »
I'm honestly suprised by the answers. I thought you guys might think I was crazy.

Offline PAPA BEAR

  • Trad Bowhunter
  • **
  • Posts: 2679
Re: Can grip design help alleviate joint issues?
« Reply #9 on: August 04, 2009, 03:31:00 AM »
i shoot low grips i'm done pretty rapidly.high grips i am fine no hand or elbow pain at all.
IT'S NEVER WRONG TO DO WHATS RIGHT AND NEVER RIGHT TO DO WHATS WRONG.....LOU HOLTZ

Offline hockey7

  • Trad Bowhunter
  • **
  • Posts: 269
Re: Can grip design help alleviate joint issues?
« Reply #10 on: August 04, 2009, 07:43:00 AM »
-I have had to stop shooting for almost a year because of elbow tendonitus. Couldn't even turn a doorknob,use a hammer, screwdriver, hold a coffee cup. I found a high grip, like my Widow PSA takes the strain off those ligaments attached to the elbow. A low grip stretches the ligaments tighter, and any shock is transmitted directly to the elbow. When in pain...ice,ice, and more ice.

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
Re: Can grip design help alleviate joint issues?
« Reply #11 on: August 04, 2009, 08:42:00 AM »
Size does mater (LOL)
Black widow PLX 48@28
Black widow PSRX 48@28

Offline BobCo 1965

  • Trad Bowhunter
  • **
  • Posts: 1364
Re: Can grip design help alleviate joint issues?
« Reply #12 on: August 04, 2009, 09:25:00 AM »
Yes. I also develope tennis elbow if I shoot my straight limbed longbows too often. When I go back to recurve, the problem goes away.

FWIW I sold most of the bows that give my elbow problems except for a few collector bows.

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8260
  • Contributing Member
Re: Can grip design help alleviate joint issues?
« Reply #13 on: August 04, 2009, 10:22:00 AM »
Buckeye:  I agree with others that grip can make a difference.  You also introduced another factor into the equation though.  You went from a physically lighter longbow to a physically heavier recurve (due to the larger riser and limbs in the recurve).  The heavier recurve absorbs more of the bow's excess energy, which means less of that energy travels up your arm at the shot.  A recurve's design vis-a-vis a standard longbow also tends to reduce hand shock more.  Though there are exceptions, less hand shock is one of the advantages of a recurve over a longbow, regardless of grip style.   :)

Offline wollelybugger

  • Trad Bowhunter
  • **
  • Posts: 684
Re: Can grip design help alleviate joint issues?
« Reply #14 on: August 04, 2009, 11:13:00 AM »
Drop down in weight and see if your elbow still bothers you. I dropped from a 55 to a 45 pound bow and my elbow problems disappeared.

Offline 30coupe

  • Trad Bowhunter
  • **
  • Posts: 3114
Re: Can grip design help alleviate joint issues?
« Reply #15 on: August 04, 2009, 02:40:00 PM »
I agree with Orion, sort of. I don't think the physical weight of the bow is as much of a factor as the hand shock. My Kanatis have zero hand shock, medium grips, and cause no joint problems. My old Mahaska with a locator grip (medium/low) weighs nearly the same, slightly more, and more yet with a bow quiver, yet until I changed from B50 to D97 skinny padded string, it was pretty shocky. My elbow suffered. So, I don't necessarily think the physical weight was the cause. I is also only 3# heavier than my Kanati in draw weight, so I doubt that is a factor. After changing to a skinny D97, I can shoot the Mahaska without pain, so I think hand shock is the major factor.

Since we are all built differently, my anecdotal evidence may not match yours or others. I do think the bow you shoot will make a difference in the amount of pain you experience, however.
Kanati 58" 44# @ 28" Green glass on a green riser
Bear Kodiak Magnum 52" 45# @ 28"
Bodnik Slick Stick longbow 58" 40# @ 28"
Bodnik Kiowa 52" 45# @ 28"
Kanati 58" 46# @ 28" R.I.P (2007-2015)
Self-made Silk backed Hickory Board bow 67" 49# @ 28"
Bear Black Bear 60" 45# @28"
NRA Life Member

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©