3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: New 3 Blade on the Market!!  (Read 2021 times)

Offline manyletters

  • Trad Bowhunter
  • **
  • Posts: 262
New 3 Blade on the Market!!
« on: September 01, 2009, 10:24:00 AM »
Introducing the new 3 blade solid broadhead from Vantage Point Archery Inc. They are 50 rockwell and come in a variety of weights....160gr and 190gr glue on and 175gr/200gr/250gr screw on. These are priced at $29.95/3 pak and are available from GIT-R-DONE Archery, Morrison Archery, Belcher Bows and Zipper Bows...all Trad Gang sponsors!!

 

   

Offline newtradgreenwood

  • Trad Bowhunter
  • **
  • Posts: 86
Re: New 3 Blade on the Market!!
« Reply #1 on: September 01, 2009, 11:16:00 AM »
They look the same as the Woodsmans.  Same size & weight.  Same little wings at base.

Offline RC

  • Trad Bowhunter
  • **
  • Posts: 4450
Re: New 3 Blade on the Market!!
« Reply #2 on: September 01, 2009, 11:19:00 AM »
I like the 1 1/4 width.RC

Offline Fletcher

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4523
Re: New 3 Blade on the Market!!
« Reply #3 on: September 01, 2009, 11:24:00 AM »
Which ones are 1 1/4"?  All I find is 1 1/8".
Good judgement comes from experience.  Experience comes from bad judgement.

"The next best thing to playing and winning is playing and losing."

"An archer doesn't have to be a bowhunter, but a bowhunter should be an archer."

Offline David Sapp

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 537
Re: New 3 Blade on the Market!!
« Reply #4 on: September 01, 2009, 11:29:00 AM »
Are they a solid one piece or is the screw in adaptor glued in?
Hunting with the bow and arrow involves earning your way by making meat, getting your hands messy in the process and then recognizing your own reflection upon them.
"The Squirrel Chronicles"
Dean Torges

TGMM Family of the Bow

Offline David Sapp

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 537
Re: New 3 Blade on the Market!!
« Reply #5 on: September 01, 2009, 11:30:00 AM »
Also how sharp are they from the pack? Do they take much work to get up to razor sharp?
Hunting with the bow and arrow involves earning your way by making meat, getting your hands messy in the process and then recognizing your own reflection upon them.
"The Squirrel Chronicles"
Dean Torges

TGMM Family of the Bow

Offline Morning Star

  • Trad Bowhunter
  • **
  • Posts: 772
Re: New 3 Blade on the Market!!
« Reply #6 on: September 01, 2009, 11:51:00 AM »
Quote
Do they take much work to get up to razor sharp?
 
Need just a little touch up.  I hit mine with a fine diamond stone and stropped....just a few minutes on each head and they're scary sharp!  Heck of a head these guys have!
Iowa Bowhunters Association - Your voice in Iowa's bowhunting and deer hunting issues!

Offline Mr.Magoo

  • Trad Bowhunter
  • **
  • Posts: 701
Re: New 3 Blade on the Market!!
« Reply #7 on: September 01, 2009, 11:51:00 AM »
You also misspelled "penetration" in the ad.

  • Guest
Re: New 3 Blade on the Market!!
« Reply #8 on: September 01, 2009, 12:08:00 PM »
Looks like the old Bodkin head, just a bit longer.

Offline Bob Morrison

  • Trad Bowhunter
  • **
  • Posts: 1066
Re: New 3 Blade on the Market!!
« Reply #9 on: September 01, 2009, 12:43:00 PM »
You could hunt with them right out of the pack, Not shaving sharp but sharp. I did take one head over a diamond stone 5 strokes per side and they were popping hair and skin at that point. They spin perfect and are very tough. I shot and hit  flat rock on a hillside, it went about 50' almost straight up and 50' down range, feathers all over the ground. BH showed no damage at all, It spun perfect and not bent at all. IMHO this is the perfect 3 blade Broadhead. We may offer it in Stainless Steel later.

Offline Don Stokes

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2607
Re: New 3 Blade on the Market!!
« Reply #10 on: September 01, 2009, 01:23:00 PM »
Not shaving sharp, but you would hunt with them??

   "[dntthnk]"    "[dntthnk]"    "[dntthnk]"
Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety.- Ben Franklin

Offline hickstick

  • Trad Bowhunter
  • **
  • Posts: 786
Re: New 3 Blade on the Market!!
« Reply #11 on: September 01, 2009, 01:35:00 PM »
teflon coated or just black paint?
Diagonally parked in a parallel universe.

Offline snag

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6337
Re: New 3 Blade on the Market!!
« Reply #12 on: September 01, 2009, 01:42:00 PM »
How long are they? I see you can get them in 1 1/4" or 1 1/8"....?
Isaiah 49:2...he made me a polished arrow and concealed me in his quiver.

Offline Bob Morrison

  • Trad Bowhunter
  • **
  • Posts: 1066
Re: New 3 Blade on the Market!!
« Reply #13 on: September 01, 2009, 02:04:00 PM »
I've have used a wire edge on heads that work great on game and sure wouldn't try to shave with it. They have a Teflon coating.and are 2.5" long. 50 Rockwell.

Offline J-dog

  • Trad Bowhunter
  • **
  • Posts: 2006
Re: New 3 Blade on the Market!!
« Reply #14 on: September 01, 2009, 03:03:00 PM »
Those be WWs??
Always be stubborn.

Captain hindsight to the rescue!

Offline manyletters

  • Trad Bowhunter
  • **
  • Posts: 262
Re: New 3 Blade on the Market!!
« Reply #15 on: September 01, 2009, 03:32:00 PM »
These are the VPA Terminator broadhead...not the other!!

Offline Don Stokes

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 2607
Re: New 3 Blade on the Market!!
« Reply #16 on: September 01, 2009, 04:20:00 PM »
No offense, Bob. Thanks for qualifying the statement.
Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety.- Ben Franklin

Online 1/4 away

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2380
Re: New 3 Blade on the Market!!
« Reply #17 on: September 01, 2009, 04:29:00 PM »
So these are not the same as the non-vented woodsmans that 3 rivers is offering?
Do not follow where the path may lead.  Go, instead, where there is no path and leave a trail.

Offline jeff w

  • Trad Bowhunter
  • **
  • Posts: 368
Re: New 3 Blade on the Market!!
« Reply #18 on: September 01, 2009, 04:43:00 PM »
Didn't Wensel invent the 3 blade broadhead???(LOL)

Online champ38

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 697
Re: New 3 Blade on the Market!!
« Reply #19 on: September 01, 2009, 04:47:00 PM »
WW..."Often imitated but never duplicated"
56" Shrew Classic Carbon 68@29
58" 2-P Centaur Cabon Elite 57@29

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©