Easton nock options

[JGray]

I just picked up some Easton ST Epics wich I believe use the "H" nock.  I really like the way they are shooting but don't care for the nocks.  I understand these are a smaller diameter shaft and don't use standard size inserts and nocks.  Do I have any options for different nocks, or an adapter similar to the AD/Grizzly Stik adaptor for glue on nocks?  It seems I saw a thread recently discussing Easton nocks but can't seem to find it.

Thanks for any help,
Jerry

[newtradgreenwood]

I can't tell you exactly which for the H nocks, but try researching Beiter and Bohning nocks. Call Easton, they may have a uni-bushing for the Epics.  

At least for the G nocks there are alot of options.  Easton makes a large groove (0.98) and a small groove (0.88), Beiter makes a #1 and a #2 which are a different design & slightly different in size than the eastons, and Bohning makes a double snap nock that fits into the Easton uni-bushing.

[JRY309]

The ST Epic's are slightly smaller diameter then your standard carbons and slightly larger then Axis/MFX.I haven't seen anything else other then H-nocks availble for them.I'm not sure they make an adapter for them to maybe use G-nocks.Unless you can find out which size ACC uni-bushing might fit the shaft and then you can use G-nocks.The ACC 3-28 uni-bushings fit in AD's,they make ACC uni-bushing in alot of sizes so it may be possible to find a bushing that may work for G-nocks.I haven't seen any nock adapters for use of glue-on nocks for ST Epic's,seen them for the standard size carbons.