3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: What Brace Height and String Length For 64" Schafer Silvertip T/D Recurve  (Read 402 times)

Offline WildmanSC

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1663
I have a 64", 3-PC T/D Schafer Silvertip recurve.  The string that came with the bow is 58" long.  When I strung the bow at The Archery Shop right out of the shipping package the BH was 8-1/4", measured from the string to the deepest part of the throat of the grip.  The string seems a bit short to me for a 64" recurve and the BH just a bit high.  Anybody have a 64" Silvertip and can you share with me the BH you use and the length of string?

Thanks!

Bill
TGMM Family of the Bow

-----------------------------------
Groves Flame Recurve 62", 45#@28"


Praise the Lord Jesus Christ, He is Worthy

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2417
Bill, been awhile since I made a string for a schafer, but should be about a 60" for your bow. good shootin, steve

Offline WildmanSC

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1663
Steve,

Thanks, that's what I thought it should be, too.  Now if someone can just tell me what the BH should be.  :)

Bill
TGMM Family of the Bow

-----------------------------------
Groves Flame Recurve 62", 45#@28"


Praise the Lord Jesus Christ, He is Worthy

Offline WildmanSC

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1663
Any more help?  Or do I wait to hear from Dave or Beth?

Thanks!

Bill
TGMM Family of the Bow

-----------------------------------
Groves Flame Recurve 62", 45#@28"


Praise the Lord Jesus Christ, He is Worthy

Offline Big Ed

  • Trad Bowhunter
  • **
  • Posts: 5144
Bill, I have mine set at about 7 5/8" but have shot it up at 8" depending on the set-up/tune. Hope this helps, Ed
"Get kids involved in the outdoors"

Offline maxwell

  • Trad Bowhunter
  • **
  • Posts: 1113
I like mine 7  3/4  to 8" high seems to be the best height for me 62" tip

Offline Jack Whitmire Jr

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 807
On my 58" and 60" they like 8" BH's.

Jack
Tolerance is a virtue of a man without any  Morals- unknown author

Offline WildmanSC

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1663
Ed,

What length is your Silvertip?  And what length string are you using with it?

Thanks!

Bill
TGMM Family of the Bow

-----------------------------------
Groves Flame Recurve 62", 45#@28"


Praise the Lord Jesus Christ, He is Worthy

Offline Danny Rowan

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4343
Bill,

If I remember correctly, Tip strings are 1" shorter than normal, ie, normally for a recurve at 64"AMO, the actual string length would be 60",4" shorter than AMO so for a Tip the string would be 59",5" shorter than AMO. Beth will answer your question for sure. On the 58-62" Tips I have owned,7 1/2"-7 3/4" was the recommended brace, had mine at 7 3/4".

Danny
"When shooting instinctivly,it matters not which eye is dominant"

Jay Kidwell and Glenn St. Charles

TGMM Family Of The Bow
NRA Life/Patron member
NAHC life member
Retired CPO US Navy 1972-1993
Retired USCBP Supervisory Officer 1999-2017

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
I think they recommend 4 inches shorter on the FF models and 5 inches shorter on the dacron bows.

Offline Warchild

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 284
Re: What Brace Height and String Length For 64" Schafer Silvertip T/D Recurve
« Reply #10 on: October 12, 2009, 10:27:00 AM »
My 62" likes a 7 5/8" BH and a 57 3/4" string.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©