3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: "Ol' Cracker" latest tillering pics  (Read 557 times)

Offline Mulberry River

  • Trad Bowhunter
  • **
  • Posts: 77
"Ol' Cracker" latest tillering pics
« on: April 08, 2007, 05:50:00 PM »
Check these out & let me know what you think.
 
She's holding up pretty well if I keep the pressure below 60#
 
but she starts complaining (slight pop) at that pressure,
 
so I'm holding around 51#, which at this stage is at 24";
 
so I need to gain about 2", which means I need to lose about 5 or 6#.  So while I was taking a; uh, I mean, while I was in some deep thought, I had an idea to strengthen the cracked riser/fade/ arrow strike-plate area.  I had thought to drill a well in that area about 1/8" diameter and about 7/8" deep and fill it with a mixture of shavings & Titebond III; but my new idea was to fill it with a toothpick/shaving/Titebond mix to give it MORE strength in the linear direction of the most stress.  Will that work better??
Some night you're gonna wind up on the wrong end of a gun...Vince Gill

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: "Ol' Cracker" latest tillering pics
« Reply #1 on: April 09, 2007, 10:58:00 AM »
It looks to me like she is bending into that glued on handle???  That might be the popping noise.  Check it carefully, if the glue lets go all the way, she will likely bust at the narrowed handle.  Popping noises are never good, BTW.  Your only likely fix is to lower the weight.

To lose weight, simply draw it to weight and make sure tiller is good.  It looks fine to me except the lower limb could use a little extra work.  Then scrape equal amounts from each limb.  I usually count 10 scrapes at a time and then exercise the bow a lot.  At least 30 full weight draws.  I like to leave about 5#s in it for break in and finish.
Take a kid hunting!

TGMM Family of the Bow

Offline Big Dave

  • Trad Bowhunter
  • **
  • Posts: 501
Re: "Ol' Cracker" latest tillering pics
« Reply #2 on: April 09, 2007, 11:04:00 AM »
I'm new at this but it looks to me like its bending to much at the fades and not enough at mid limb but like I said I'm new at this
Live today like you'll meet God tommorow (you might)

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©