Help-- Points don't fit --

[Ssamac]

     

Got some Easton XX75 Camo Hunter Aluminum Shafts and none of my tips fit. The threads work but the unthreaded part that goes into the insert is too thick so I can't get it past one or two turns. Is it the inserts or do I need a different point? Who has has some success with the right points for these?

thanks
sam

[JRY309]

All inserts for Easton XX75 camo or any other Easton arrows are all 8/32 thread and the shank is the same.Have you tried running a 8/32 tap in it? I had a set of inserts in a set of carbons I had to run a tap through all of them.All inserts for carbons or aluminum are standard on the thread and shank,unless yours may be damaged.

[bushytail]

Sometimes glue will come through the little hole in the insert when being glude in.Then the points won`t go all the way in.Heat the insert to soften the glue while turning your point in.They won`t come loose then.