Got my Shrew...Need arrow help!

[KellyBender]

Just got a Shrew classic hunter but need somne help with some arrow spine since the bow is heavier than I normally shoot so all my arrows are weak.  The bow is a 56" CH.  51@28" but I am drawing 30" so i am looking at about 56-57lbs@30".  Would like to stick to a carbon arrow...heritage etc.  Thanks for any help you can give...
Greg

[onewhohasfun]

Kelly, I have a 60" super shrwew #56@30 and it likes GT 55/75with 300 or so up front, full lenght. A-D trad lites work great also with just about any tip weight you want, just cost a little more than GT's Good luck ,Tom

[WESTBROOK]

My 60" SS #54 @ 30" likes CX150 30.5" 175 point. 56" CH #58 @ 30" seems to favor full length Beman mfx 400 with about 200g up front.

Eric

[amar911]

Greg,

I would go with the AD Trad Lite or Ad Hammerhead Trad Lite. They are very tolerant of the bows you shoot them out of and what you hang on the arrow shaft (as in the point or broadhead). I know they work best out of my Shrews of the same draw weight and almost the same length shaft.

Allan

[phil_des_bois]

maybe a picture of your new shrew could help us to determine the arrow spine you need    

Phil

[**DONOTDELETE**]

Try a Carbon Vapor 3000 with about 230 grains up front.

Also maybe a 2016 with the same wieght in front.

[woodsman196]

My 56" 55@29" Classic Hunter loves full length AD Hammerheads with 250 grains on the point end. Total arrow weight if I remember right was about 730 Gr. I get excellent arrow flight and the bow is very quiet.

[huckbuck]

I shoot easton axis 400's with a 125gr Magnus 2-blade and a 100gr steel bh adaptor (225gr) with
my 57@30 56" C.H.

[Matty]

I shoot 3555 out of mine but I draw 28" on a good day!
with 30" I would go with 5575 And 100gr Brass insertsand 145gr tip. Full length