Author Topic: Crown/Crest weight?? (Read 166 times)

Aggie1993 · « **on:** December 11, 2009, 12:56:00 PM »

Does someone have an estimated weight for the addition of a 9" crown/crest/seal on a carbon arrow(CE or ICS diameter? Thanks

JimB · « **Reply #1 on:** December 11, 2009, 01:03:00 PM »

Some I used that are 1"X8" are 12 grains.

Jason R. Wesbrock · « **Reply #2 on:** December 11, 2009, 01:21:00 PM »

Are you talking about wraps or paint?

Paul Mattson · « **Reply #3 on:** December 11, 2009, 01:44:00 PM »

If you are talking paint, it will depend on type of paint and thickness, sprayed or dipped.

Orion · « **Reply #4 on:** December 11, 2009, 02:08:00 PM »

Two coats of Bohning lacquer will add about 10 grains, plus or minus 1-2 grains.

Aggie1993 · « **Reply #5 on:** December 11, 2009, 02:50:00 PM »

Yes paint. I know there are several variables to consider but I thought some arrow artist like Badger would be able to give me a low and high range. Thanks again.

Paul Mattson · « **Reply #6 on:** December 12, 2009, 12:55:00 AM »

I use Bohning paints for dipping. I use 1 heavy dip and when put on a scale, it comes out like Orion said, right around 10 grns or so.

When trying to get a matched set of wood arrows. A full dip of gasket lac will also come in at 10 grns.

News:

Author Topic: Crown/Crest weight?? (Read 166 times)

Aggie1993

Crown/Crest weight??

JimB

Re: Crown/Crest weight??

Jason R. Wesbrock

Re: Crown/Crest weight??

Paul Mattson

Re: Crown/Crest weight??

Orion

Re: Crown/Crest weight??

Aggie1993

Re: Crown/Crest weight??

Paul Mattson

Re: Crown/Crest weight??

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS