3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Leather knife sheath build along  (Read 528 times)

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Leather knife sheath build along
« on: April 13, 2007, 09:33:00 PM »
With the Drop point knife now done. I started on the sheath. I am really getting into leather working.

I started with a piece of scrap leather to come up with the sheath design. After a few tweaks, It's ready to transfer to the good leather.

 


The good piece of leather is a 8 Oz. Veg tanned shoulder.

 

8 Oz. means it's slightly thicker than an 1/8 of an inch.

 

From this piece of leather I cut the sheath, The belt loop and the welt which gets sewed into the sheath to protect the stitching from the sharp knife blade.

 

The design I want to carve and stamp into the leather is a simple one. A border with a basket weave and a deer's head.

 

I wet (cased) the leather with water and a sponge so it would take the tooling I will do.

 

I then used the swivel knife to cut the border about half way deep into the leather.

 

Next, I used a stamp with the likeness of a deer's head.

 
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #1 on: April 13, 2007, 09:34:00 PM »
With the small basket weave punch (at the top) I kept striking the leather in an alternating pattern.

 

Lastly I used a feather stamp and went around the border.

 

When held up to the light, you can see the depth of the 3D pattern.

 

I finished the stamping part of the project by putting a pattern on the belt loop.

 
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #2 on: April 13, 2007, 09:35:00 PM »
Next up. Sewing it all together.
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline paleFace

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1466
Re: Leather knife sheath build along
« Reply #3 on: April 13, 2007, 09:38:00 PM »
looking good.... you have inspired me... i'm working on a knife from the knife build-a-long now so this sheath build-a-long is the perfect addition.... thanx    :thumbsup:
Logged
>~Rob~>

"Dad, I need to sit down I'm shaking to bad" my 12 year old son the first time he shot at a deer with his bow.
_ _ _ _ _ _ _ _ _ _ _  _  _  _  _  _  _  _  _

Offline cory hunter

  • Trad Bowhunter
  • **
  • Posts: 34
Re: Leather knife sheath build along
« Reply #4 on: April 13, 2007, 09:41:00 PM »
wow awsome, were did you get the tools for that kind of designing? id love to get my hands on a few

-cory
Logged
theres room for all of gods creatures...and thats right next to my mashed potatoes!

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #5 on: April 13, 2007, 10:10:00 PM »
Tandy leather factory.
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline Whip

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 8189
Re: Leather knife sheath build along
« Reply #6 on: April 14, 2007, 12:30:00 AM »
This is perfect Ron!  I have a knife that needs a sheath - I'm following this one step by step!
Logged
PBS Regular Member
WTA Life Member
In the end, it is not the years in your life that count. It's the life in your years. Abraham Lincoln.

Offline Teacher_of_the_Arcane

  • Trad Bowhunter
  • **
  • Posts: 437
Re: Leather knife sheath build along
« Reply #7 on: April 14, 2007, 10:22:00 AM »
Ron,

I picked up a nice little knife from Fred Asbell at the Traditional Expo a couple of weekends ago.  Now I can do a very functional sheath to go with it!!

Thanks for your efforts in posting the process.

Lobo in West Virginia
Logged
Lobo Lohr -- Old School Hunter

Offline the Ferret

  • Trad Bowhunter
  • **
  • Posts: 3232
Re: Leather knife sheath build along
« Reply #8 on: April 14, 2007, 11:04:00 AM »
Teacher..I ALMOST bought one of those knives (wished I had later). He only had one small one left when I took off. Which one did you get?
Logged
There is always someone that knows more than you, and someone that knows less than you, so you can always learn and you can always teach

Offline elk ninja

  • Trad Bowhunter
  • **
  • Posts: 1024
Re: Leather knife sheath build along
« Reply #9 on: April 14, 2007, 11:46:00 AM »
I DID buy one of those little knives from Fred, great little knife, it's going to be handy if I ever get lucky enough to use it this year... I am going to make mine a neck sheath and include a "scout sparker" (fire starter)...
Logged
>>>--Semper-Fi--->

It is better to remain silent and be thought a fool than to open one's mouth and remove all doubt.
-Abraham Lincoln

Offline Kindred Mark

  • Trad Bowhunter
  • **
  • Posts: 45
Re: Leather knife sheath build along
« Reply #10 on: April 14, 2007, 03:33:00 PM »
Ron, exceptional lesson, looking forward to the sewing part.  Can you include the tools required for a beginner; Any books or videos you would recommend to get into this hobby at the conclusion.  Thanks Marks
Logged
Aim Small, Miss Small

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #11 on: April 14, 2007, 04:40:00 PM »
Mark. I have never read any books or watched any videos so I can't recommend any. I have never really done much leather work until about 2 months ago when I made an armguard. I'm leaning as I go. The Tandy leather factory is where I have purchased all my supplies. I have asked a few questions while I was there. Mostly I do things by trial and error.
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #12 on: April 14, 2007, 04:41:00 PM »
In order to hand stitch the leather, I find it easier to use contact cement to hold the pieces in place so after I punch the holes, things won’t be shifting and sliding around on me.

 

To stitch leather this thick I need to punch holes. To do this I used a forked chisel punch.

 

Then I repeated the process on the bottom of the belt loop. I am sewing with a heavy braided waxed thread with a breaking point of 35 pounds.

 

 

Next, I cemented the welt in place

 

I have to sew through 3 layers of leather for the welt. The forked punch is not quite long enough to go through all the layers so it takes a little force to push the needle through.

 

After stitching, I trimmed the edge all around and added a brass rivet in the high stress area.

 

Next up. Coloring and finishing.
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline AZStickman

  • Trad Bowhunter
  • **
  • Posts: 967
Re: Leather knife sheath build along
« Reply #13 on: April 14, 2007, 06:31:00 PM »
Fantastic Build along..... Nice worksmanship....   :thumbsup:  Terry
Logged
"The reward of a thing well done is to have done it.".. Ralph Waldo Emerson

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #14 on: April 14, 2007, 08:39:00 PM »
In order to shape the opening and make it stay in that shape. I wetted the leather and placed the knife back in the sheath.

 

After clamping it and letting it dry for a few hours. It took the shape nicely.

 

 

 

Next. I added a little color to the leather. I used a product called antique finish.

 

 

After applying the finish. I wiped it off and buffed it.

 

When it dried, I applied edge kote to the cut edges of the leather to make it smooth and make it shine.

 
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline RGK

  • Trad Bowhunter
  • **
  • Posts: 845
Re: Leather knife sheath build along
« Reply #15 on: April 14, 2007, 08:41:00 PM »
lastly, I added I applied 3 coats of super sheen to seal, waterproof and give the leather a nice shine. Project complete.

 
Logged
Member: WI Bowhunters Association
Member: WI Traditional Archers
Member: American Broadhead Collectors Club
Member: Sherwood Forest Bowmen

Offline AllenR

  • Trad Bowhunter
  • **
  • Posts: 214
Re: Leather knife sheath build along
« Reply #16 on: April 14, 2007, 09:28:00 PM »
Beautiful work!!!
Logged

Offline pintail_drake2004

  • Trad Bowhunter
  • **
  • Posts: 535
Re: Leather knife sheath build along
« Reply #17 on: April 14, 2007, 09:36:00 PM »
i wish i could do that.
very nice.
Logged

Offline Kevin/TX

  • Trad Bowhunter
  • **
  • Posts: 13
Re: Leather knife sheath build along
« Reply #18 on: April 15, 2007, 01:37:00 AM »
What a great build a long. Thanks
Logged
"Faith gives us a conscience to keep us honest even when no one else is watching." George W. Bush
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©