I need some help with an old Bob Lee Red Wing Hunter (58", 47# @ 28). I recently acquired it for my wife and it looks almost new! Anyway, the string that came with it had been used on the bow since the string nock was installed at what looked like the correct location. However, judging from the serving on the string, the string was on upside down (both loops were the same size)! Anyway, I removed the old nock (probably came new with the string and bow), flipped the string, and installed a new nock. I drew the bow back and everything felt fine. The bow pulls right at 47# @ 28" as it should. However, the string contacts the limb for about 3/4 of an inch below the string groove on both limbs. Is that normal? I compared the string to that of a 58" Bandito and the Red Wing's string is around an inch longer, but the Bandito string appears too short for the Red Wing. So what length string do I need and what brace height range is normal for this bow?
Topic: Red Wing brace height (Read 290 times)
