Author Topic: Limb Wedges (Read 433 times)

SOS · « **on:** April 19, 2007, 06:55:00 PM »

What are the dimensions and shape of limb wedges for TD longbows? I may try and make my own. Kind of look like they are parallel for 1/2 length then taper down...or am I just imagining things? Steve

Crooked Stic · « **Reply #1 on:** April 19, 2007, 08:56:00 PM »

Take a look at this. About 1/3rd of the length is tapered. Your design dictates the length you need.

SOS · « **Reply #2 on:** April 19, 2007, 10:19:00 PM »

CS, are those Bingham wedges for a recurve? If they are made like that, does the long flat side go to the back and is the part that is flat against the form? Steve

SOS · « **Reply #3 on:** April 20, 2007, 04:39:00 PM »

ttt, someone must have some suggestions on wedge dimensions? Anyone? STeve

Peckerwood · « **Reply #4 on:** April 20, 2007, 05:45:00 PM »

The wedges that I use for my TD Long bow are 10" long , 3/8 in. thick with a continuous taper. One advantage of having some parallel before the start of your taper is a flush limb bolt fit without a reverse taper limb overlay. It all depends on your limb design.

Crooked Stic · « **Reply #5 on:** April 20, 2007, 10:22:00 PM »

Those wedges I made.They are .200 thick. That design takes a 7 3/4 wedge. Yes the flat part is on the front of the bow for a smoother profile.

News:

Author Topic: Limb Wedges (Read 433 times)

SOS

Limb Wedges

Crooked Stic

Re: Limb Wedges

SOS

Re: Limb Wedges

SOS

Re: Limb Wedges

Peckerwood

Re: Limb Wedges

Crooked Stic

Re: Limb Wedges

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS