3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Damon Howatt 62" Hunter & 30" Draw Length  (Read 311 times)

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Damon Howatt 62" Hunter & 30" Draw Length
« on: March 21, 2010, 09:27:00 AM »
Just curious. Does anyone own a Damon Howatt (Martin) 62" Hunter recurve with a 30" draw length? If so, do you have an issue with finger pinch? The reason I'm asking is because 35 years ago I once owned a 60" one piece Bear Super Kodiak that gave me a bad case of finger pinch since I draw and hold a few seconds before I release the arrow. I've never liked finger pinch so I sold the Super Kodiak. Damon Howatt says the Hunter will perform well with up to 30" draw lengths. Just wondering if this statement is true or just marketing hype?

I already own two take down recurves, but I'd like to purchase a one piece recurve and the 62" Hunter along with two other bow models are the ones I'm considering.

 http://www.damonhowatt.com/hunter.php
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Online Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8253
Re: Damon Howatt 62" Hunter & 30" Draw Length
« Reply #1 on: March 21, 2010, 09:45:00 AM »
The 62" Hunter will be very pleasant at your 30" draw. I shot one for years at closer to 31" and loved it.
62" is my preferred recurve length.
Hunt Sharp

Charlie

Offline jhg

  • Trad Bowhunter
  • **
  • Posts: 1347
Re: Damon Howatt 62" Hunter & 30" Draw Length
« Reply #2 on: March 21, 2010, 09:45:00 AM »
I own two Damon Howatt hunters. A 1973 and 1979. Both are 55# @ 28 or 60 @ 30, which is my draw length.

These bows do not stack and do not pinch. 2.5lbs per inch after 28 is about as good as it gets regardless of price or design!

Nice bows.

Joshua
Learn, practice and pass on "leave no trace" ethics, no matter where you hunt.

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: Damon Howatt 62" Hunter & 30" Draw Length
« Reply #3 on: March 21, 2010, 10:32:00 AM »
Damon Howatt now makes a truly custom bow. DH advertises on their home page they can make the poundage at your draw length for a little more money. Click on the link below to see this info.

 http://www.damonhowatt.com/

I might have to call DH Monday to check it out.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline Jason R. Wesbrock

  • Trad Bowhunter
  • **
  • Posts: 2507
Re: Damon Howatt 62" Hunter & 30" Draw Length
« Reply #4 on: March 21, 2010, 12:53:00 PM »
Perhaps the older Howatt Hunters wee better than the later Martin Hunters? I bought one new in 2000 and it stacked like a pile of bricks past 28".

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©