Jaguar Recurve bowstring length, I don't get it

[FrankM]

I just picked up a new string. The bow is 60" and the string is 14 strand 56" long. But, I put the string on without twisting, and the brace height is 8 1/4". The bow specs say it should be 7". Do you think this will be okay? The string is to AMO specs. Or do I have to get a 57" inch string for this?

[Van/TX]

Maybe the bow is not 60" AMO.  In any case you should probably get a 57" string...Van

[Robert Honaker]

leave it in overnight. I bet it will stretch and be around 7 1/2 by morning.

[FrankM]

I just checked it. Now it's down to 7 5/8".

GOD, I hate being such a newbie.     You guys got any firearms questions, I'm here for ya! LOL

[koger]

After you put a couple of hundred arrows through it, should be spot on. If long then, just give here a few twists. Those Jags shoot real nice have helped tune up several. All the guys around here are shooting them with a wrist sling on and a tight bone/handle fit witht heel of the hand. They shoot really sweet, center shoot the rest like a compuond,set the nock 1/4 inch above center and should do ok. Sam.

[Jeremy]

AMO specs state a bow's length is 3 inches longer than the string that properly braces it and that strings are measured under tension.
A 60" AMO bow should need a 57" string so when you buy a '60" AMO' string it should end up being 57" after settling in.

Bows and strings mis-marked "AMO" has become a real big pet peeve of mine!  If you mark it "AMO" it d*** well better BE "AMO"

OK, I'm calm now.

[vermonster13]

What Jeremy said.

[FrankM]

Interesting. I emailed Martin, they said said to use a 57" inch string as it should be 3" less for this bow. Yet, I left the 56" string on overnight. The brace height is now at 7 1/2" which is the upper end of the brace height of 7" to 7 1/2" for the 2009 model. The recommended brace height is 7" only for the 2010 model, which this is. So, if I shoot this string it'll probably lessen the brace height. But, according to Martin and some of the posters, I should probably go back and get the 57" string. Do you think that would be best? Did Koger tune the other Jags with a 56" string?

[vermonster13]

Let the string settle in. It will most likely stretch some more when shot for a bit. I'd wait and see where it ends up before spending any cash on a new string.

[FrankM]

So, the string package said AMO 60" bow and said the length was 56". Does that mean it comes out of the package at 56" and will stretch to 57" meaning it's really a 57" string, or is it just a 56" string?

[dhaverstick]

Frank,
   I can make you a new B50 string with a lot of twist if you would like. That way you will have plenty of adjustability. Just send me a PM with your mailing address and color preferences.

Darren

PS. Looks like you and I are in the same profession; code monkeys

[FrankM]

I'll think about the string, not a bad idea. And yes, I'm a computer geek. That's why I'm analyzing this to death. LOL

[FrankM]

Can you clear something up? The norm is generally 3" for a longbow, and 4" for a recurve. Does this mean that if your recurve bow is 60", it should be only 56" tall when strung? No matter what string length is used? In other words, the standard is not string length, but bow length?

[lpcjon2]

Frank Just shoot it and relax.It's all good!

[vermonster13]

AMO is 3" less than bow listed length period if it is AMO. Otherwise it is just whatever the bowyer says. There is one bowyer who's bows take strings 2" shorter than what is written on the bow for bow length. If everyone just did AMO there would be a lot less confusion.

[FrankM]

Originally posted by lpcjon2:
Frank Just shoot it and relax.It's all good!

Sorry. I mean, Bazinga!

[lpcjon2]

It all works out in the end I think I was way worse than you when I started,I drove my buddy nuts.Once you get down to shooting a lot you will get the feel for the bow and the arrow, and it will take less effort to get it adjusted when something changes.Good luck

[vtmtnman]

It is possible that the new string was purposely made shorter to account for stretch.I learned after several strings to make a dacron string 2" shorter to account for stretch and 1" for any FF low stretch material.

[FrankM]

I checked my bow and the brace height is hovering at 7 1/2". The 2010 spec for the Jag says 7". I haven't shot this string yet, but it's been on the bow for about 36 hours straight. I think I'll shoot it, and then put a 57" string on it for funzies and see how it's diffferent.

[Jeremy]

Originally posted by vermonster13:
AMO is 3" less than bow listed length period if it is AMO. Otherwise it is just whatever the bowyer says. There is one bowyer who's bows take strings 2" shorter than what is written on the bow for bow length. If everyone just did AMO there would be a lot less confusion.

I had one longbow marked 64" that took a 62.5" string to brace!


 

If everyone just did AMO there would be a lot less confusion.

That needs repeating a few more times.