3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Do you have to have a chopper/burner?  (Read 422 times)

Offline gudspelr

  • Trad Bowhunter
  • **
  • Posts: 990
Do you have to have a chopper/burner?
« on: May 05, 2010, 04:55:00 AM »
I'm getting myself a bunch of free (my favorite price) feathers now and want to get some cut for fletching.  I'm thinking 4" shield cut would be great and a buddy has a fletching tool that I can use.  Only thing is, he doesn't have a chopper or burner and neither do I.  I'm not in a position to be able to buy one and was wondering if there was a "do it yourself" way of cutting the feathers to the proper shape?  Would a template and really sharp knife work?  I'm assuming there'd be some problems since all the choppers come in either left or right wing?  Thanks for the help


Jeremy
"Have nothing in your house that you do not know to be useful, or believe to be beautiful."
- William Morris

Craftsmen strive to make their products both.

Offline barebow17

  • Trad Bowhunter
  • **
  • Posts: 408
Re: Do you have to have a chopper/burner?
« Reply #1 on: May 05, 2010, 06:57:00 AM »
Jeremy, I just got a burner.I have a bananna chopper that needs repair. You can use it right or left. If you can use it you can have it.

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: Do you have to have a chopper/burner?
« Reply #2 on: May 05, 2010, 07:11:00 AM »
I use a burner,there is no limit to what you can do with it in feather shapes.And is more consistent in the shapes.Choppers do alright,but doesn't always cut consistent depending on the quill.Burner ribbons are inexpensive,Little choppers you have one shape per chopper.I bought my Young Feather burner over 15 years ago and it still works great.

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12251
  • Contributing Member
    • Cavalier Pickups
Re: Do you have to have a chopper/burner?
« Reply #3 on: May 05, 2010, 07:12:00 AM »
lay down a section of full length feather on wide masking tape, hold down yer feather shape template, cut with scissors.  foregoing the tape can make for ragged feather edges as the feather yields to the scissors.  

for primitive type feathers (just an angle cut), fletch up with exact length full height feathers, lay down the shaft on a grooved board that also has a 'template groove' for the feather angle, lay a big knife blade in the angle groove and whack with a hammer - instant feather chopper.

but really, getting a li'l chopper is by far the better way to go.
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: Do you have to have a chopper/burner?
« Reply #4 on: May 05, 2010, 08:48:00 AM »
Do a search in the how to sec. There was a gentleman who did it with a template, cut to the shape of the desired shape, and used a flame from burner to shape to the edge. Seeme to work real good.

I have metal template for banana cut, and use another plate of sheet metal under feather, and cut with Sharp knife, works good, too.

Offline Jim Dahlberg

  • Trad Bowhunter
  • **
  • Posts: 105
Re: Do you have to have a chopper/burner?
« Reply #5 on: May 05, 2010, 08:55:00 AM »
Or just glue on the feathers and cut the shape you want with a pair of SHARP scissors.  I've been doing this with my wild turkey fletched sinew tied arrows for many many years.  The feathers don't have to be perfect to fly just fine.

Offline frank bullitt

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 2428
Re: Do you have to have a chopper/burner?
« Reply #6 on: May 05, 2010, 09:56:00 AM »
Yeah, done the scissors too, Jim. I know if you do this archery thing for awhile, you will probably try them all!

I have the burner, Young's and an old Outers, had the chopper, too.

Great thing about the sport, over 30 years of building arrows, still not my favorite thing, but it is a great part of the Romance! Have Fun!

Offline gudspelr

  • Trad Bowhunter
  • **
  • Posts: 990
Re: Do you have to have a chopper/burner?
« Reply #7 on: May 05, 2010, 03:19:00 PM »
Thanks for the help, guys.
barebow17-thanks for the offer; wouldn't know the first thing about repairing a chopper, though...

frank-thanks for the info in the how-to section.  Will definitely try looking that one up.


Jeremy
"Have nothing in your house that you do not know to be useful, or believe to be beautiful."
- William Morris

Craftsmen strive to make their products both.

Offline graysquirrel

  • Trad Bowhunter
  • **
  • Posts: 76
Re: Do you have to have a chopper/burner?
« Reply #8 on: May 05, 2010, 04:06:00 PM »
Rob describles exactly how Howard Hill used to do it.  He did it that way very well.
When I do it that way, I screw up a lot of feathers.

I use a burner
Bob L

Offline fishnbum

  • Trad Bowhunter
  • **
  • Posts: 11
Re: Do you have to have a chopper/burner?
« Reply #9 on: May 08, 2010, 03:05:00 PM »
I use a burner for two reasons. I can make any style fletching I want. And maybe more important is I feel that burning helps seal the feathers better.  I picked up both my burner as well as a creasting tool at a yard sale, some twenty plus years ago. Both home made by the older gentalman having the sale. He went to state a number of times.   When I get a chance I can post pictures, if you would like.
Dave

Offline 3Under

  • Trad Bowhunter
  • **
  • Posts: 540
Re: Do you have to have a chopper/burner?
« Reply #10 on: May 08, 2010, 03:31:00 PM »
I have several choppers and a "Young Feather Burner". I prefer the burner. Choppers eventually get dull.
PBS,KTBA,HCB,UBK
       
...  When thru the forest glades I wander and hear the birds sing sweetly in the trees, when I look down from lofty mountain grandeur and hear the brook and feel the gentle breeze, ...How great Thou art!

Offline Two Dogs

  • Trad Bowhunter
  • **
  • Posts: 98
Re: Do you have to have a chopper/burner?
« Reply #11 on: May 08, 2010, 03:52:00 PM »
Just a tidbit of advise, do your feather burnin" in your garage or outside.Especially, if your married!

Offline monkeyball

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 1745
Re: Do you have to have a chopper/burner?
« Reply #12 on: May 08, 2010, 03:55:00 PM »
Jeremy,
        These guys are not being nice by NOT telling you the most important part about a burner.
  Unless you are single,make sure you do this outside. Wives or girlfriends do not appreciate the
aroma of turkey feathers being seared on a hot ribbon,unlike us guys who seem to acquire a fondness of it. Kind of like limburger cheese,it grows on you. Make sure you do it outside and downwind of your house. It is my favorite way to shape fletch.Good luck, Craig

Offline monkeyball

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 1745
Re: Do you have to have a chopper/burner?
« Reply #13 on: May 08, 2010, 03:56:00 PM »
Looks like I was a post late on this one.

Offline DV of WI

  • Trad Bowhunter
  • **
  • Posts: 139
Re: Do you have to have a chopper/burner?
« Reply #14 on: May 08, 2010, 04:27:00 PM »
I use an acu sharp to keep the edge on lil chopper. Seems to work well keeping the edge when it goes a little dull.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©