3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Adhesive for strike plates?  (Read 848 times)

Offline Izzy

  • Trad Bowhunter
  • **
  • Posts: 7487
Adhesive for strike plates?
« on: May 02, 2007, 09:02:00 AM »
Hey folks quick question.I tore my leather plate yesterday and I need to put a new one on fast.Whats best for attaching leather to a longbow? Thanks Herk

Online Charlie Lamb

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 8251
Re: Adhesive for strike plates?
« Reply #1 on: May 02, 2007, 09:07:00 AM »
About a zillion guys are gonna tell you to get Barge Cement... a popular contact cement which is pretty mild.

I've always just bought any cheap contact cement from the local hardware and have had no problems with clean up... laquer thinner and elbow grease.

It WON'T come off until you want it to.  :thumbsup:
Hunt Sharp

Charlie

Offline ALW

  • Trad Bowhunter
  • **
  • Posts: 392
Re: Adhesive for strike plates?
« Reply #2 on: May 02, 2007, 09:47:00 AM »
I use Weldwood contact cement.  I just put the adhesive on the leather and not on the bow.  I don't let it tack up very much either.  Then just stick it on.  It holds very well but can still be removed and cleaned off easily.

Aaron

Offline JC

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 4462
Re: Adhesive for strike plates?
« Reply #3 on: May 02, 2007, 10:10:00 AM »
Charlie taught me a trick that works well...use contact cement (I use a cheap off brand) on the back of duct tape. You can peel it off and put it on multiple times, cutting it shorter as you wear a groove to extend it's useful life. As long as you don't get it greasy from finger oils while you do this, you can pull it off/on many times and it doesn't come off unless you peel it off. You can also have a spare rest in your kit when you travel, stuck to a piece of plastic that can be moved multiple times.
"Being there was good enough..." Charlie Lamb reflecting on a hunt
TGMM Brotherhood of the Bow

Offline doctorbrady

  • Trad Bowhunter
  • **
  • Posts: 402
Re: Adhesive for strike plates?
« Reply #4 on: May 02, 2007, 12:39:00 PM »
I use indoor/outdoor double stick carpet tape.  You have to get the kind that looks woven.  I get it at Wally World for a few bucks and a roll lasts me....well until I lose it.  You can take the plate on and off several times to adjust and you don't have to worry about putting on something that is permanent.

Offline Walt Francis

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 3106
Re: Adhesive for strike plates?
« Reply #5 on: May 02, 2007, 01:12:00 PM »
I use barge cement, contact cement, duco, or fletch tight, which ever one is handy, they all work fine.
The broadhead used, regardless of how sharp, is nowhere as important as being able to place it in the correct spot.

Walt Francis

Regular Member of the Professional Bowhunters Society

Offline varmint

  • Trad Bowhunter
  • **
  • Posts: 678
Re: Adhesive for strike plates?
« Reply #6 on: May 02, 2007, 02:16:00 PM »
Most of mine I use are sticky backed already,if not Barge cement.
Bowhunting......A way of life and death.

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Adhesive for strike plates?
« Reply #7 on: May 02, 2007, 04:08:00 PM »
me i use velcro the soft side for a strike plate you can have 3-4 in your pocket. good stuff  :thumbsup:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline Dave Worden

  • Trad Bowhunter
  • **
  • Posts: 763
Re: Adhesive for strike plates?
« Reply #8 on: May 02, 2007, 06:21:00 PM »
I used hot-melt on my latest one.
"If I was afraid of a challenge, I'd put sights on my bow!"

Offline MMilin

  • Trad Bowhunter
  • **
  • Posts: 58
Re: Adhesive for strike plates?
« Reply #9 on: May 05, 2007, 10:33:00 PM »
Barge cement is as good or better than anything out there; that's, I think, indisputable.

It's also cheap and readily available.  That begs the question:  Why would anyone choose to use something else?

Mark

Online stagetek

  • Trad Bowhunter
  • **
  • Posts: 1748
Re: Adhesive for strike plates?
« Reply #10 on: May 05, 2007, 10:45:00 PM »
Carpet tape.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©