Author Topic: how to easily repair woodies (Read 716 times)

phil_des_bois · « **on:** May 04, 2007, 04:37:00 PM »

Here is a tiny tool I've just made to easily repair my woodies. I've made it in a piece of oak.

phil_des_bois · « **Reply #1 on:** May 04, 2007, 04:39:00 PM »

I use it with a band saw, and use wood glue

phil_des_bois · « **Reply #2 on:** May 04, 2007, 04:40:00 PM »

Here is a scan of the piece of wood I use. This is a full size image, the size is 14cm by 25 cm (sorry guys I'm using centimeters rather inches).

phil_des_bois · « **Reply #3 on:** May 04, 2007, 04:41:00 PM »

Hope this help ... Phil

SOS · « **Reply #4 on:** May 04, 2007, 07:04:00 PM »

Neat jig. I'm still sanding on my taper sander and gluing the 2 bevels together. That looks a lot stronger.

The Whittler · « **Reply #5 on:** May 04, 2007, 07:11:00 PM »

Now that looks easy enough for even me. Thanks. Alan

philil · « **Reply #6 on:** May 05, 2007, 09:18:00 AM »

Not only simple, but it looks great too!!

Dave Worden · « **Reply #7 on:** May 05, 2007, 10:48:00 AM »

Obviously, also a great way to add a hardwood foot to a softwood shaft. Great idea. Merci, Phil!

SCATTERSHOT · « **Reply #8 on:** May 05, 2007, 11:18:00 AM »

Super idea, thanks for the tip.

phil_des_bois · « **Reply #9 on:** May 06, 2007, 05:15:00 PM »

Thanks guys. I forgot to add that you usually end up with a small bump due to a slight excess of wood :

I correct that with a plane :

then sand it and no more bumps, "et voilà" :

Phil

News:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS