3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Pelouze bow scale  (Read 205 times)

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Pelouze bow scale
« on: August 19, 2010, 01:55:00 PM »
Does anyone have experience with this scale? I thought mine was right on the money for a long time, but I recently got a new bow and proceeded to check the dw on it. It looked to be about 5#'s lighter than it should. I started checking my other bows, and they too are coming up around 5#'s light (2-3# on my kids 20-30#ers).

I can hang 50# of steel plates on it, and it reads exactly 50#...what gives??   Any ideas??

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: Pelouze bow scale
« Reply #1 on: August 19, 2010, 01:57:00 PM »
are you going by the back side of the bow to 28" (if it's marked 28")

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: Pelouze bow scale
« Reply #2 on: August 19, 2010, 02:14:00 PM »
Yep, I'm using 28" to the back side of the riser and also measuring to the deepest part if the grip (minus 1 3/4")...usually the same measurement.

I'm no where near the marked weights no matter how I measure them.

Offline Ryan Sanpei

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3114
Re: Pelouze bow scale
« Reply #3 on: August 19, 2010, 03:00:00 PM »
Are you talking about the spring model?  I've had problems with mine too. I've switched to digital scales.

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: Pelouze bow scale
« Reply #4 on: August 19, 2010, 03:11:00 PM »
Yes, I have the spring model.

Offline Ryan Sanpei

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3114
Re: Pelouze bow scale
« Reply #5 on: August 19, 2010, 03:20:00 PM »
The spring in my scale used to do some weird things.  Some days I would have to yank on the scale a few times to get it to read correctly. It's as if the spring wouldn't seat correctly. Does your scale have an adjustment knob/screw for calibration/adjustment?  I also tried to keep the spring/unit oiled.  I just gave up after awhile.   :D

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: Pelouze bow scale
« Reply #6 on: August 19, 2010, 03:38:00 PM »
Yes, mine has the adjustment knob. I'll go try to oil the spring and see if that helps any.....thanks.

Offline lt-m-grow

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: Pelouze bow scale
« Reply #7 on: August 19, 2010, 04:42:00 PM »
Quote
Originally posted by mysticguido:
are you going by the back side of the bow to 28" (if it's marked 28")
I think he meant the "back of the bow" as in not, the belly.  It seems to contradict with your riser comment if I am reading correctly.

Offline jax

  • Trad Bowhunter
  • **
  • Posts: 184
Re: Pelouze bow scale
« Reply #8 on: August 19, 2010, 04:57:00 PM »
Heck, if it were me I would pull this thread.

Offline T Folts

  • Trad Bowhunter
  • **
  • Posts: 1922
Re: Pelouze bow scale
« Reply #9 on: August 19, 2010, 08:00:00 PM »
If you are hanging your scale from the string then you will need to add the weight of the scale to the pulled weight. When you hang the scale you are putting the scale weight on the string starting your draw before you actually pull. Make sense?
Terry
US ARMY 1984-1988

Offline A.S.

  • Trad Bowhunter
  • **
  • Posts: 3579
Re: Pelouze bow scale
« Reply #10 on: August 19, 2010, 08:13:00 PM »
Terry, I have the scale hanging solid. I hook the string on the scale hook and pull down holding only the bow grip.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©