Author Topic: Tie on or metal nock set? (Read 1629 times)

razorsharptokill · « **on:** May 15, 2007, 07:25:00 PM »

Which do you prefer and why?

Golden Hawk · « **Reply #1 on:** May 15, 2007, 07:34:00 PM »

I prefer the tie on. They don't tear up my gloves and tabs like the brass ones do. I also think I get a little cleaner release with the tie on.

30coupe · « **Reply #2 on:** May 15, 2007, 07:36:00 PM »

Tie on! The metal ones are hard to adjust, plus they wear out my index finger. With a tie on (I use B-50) you can just twist it up or down the serving to tune your bow. It also looks more trad (IMHO). Tie on also costs next to nothing.

whitebuffalo · « **Reply #3 on:** May 15, 2007, 07:38:00 PM »

Tie on,, for tunning my bow I just twist it up and down the string and it follows the serving like its a threaded bolt,, and the tear on your glove isn't worth it. I tie a decent size ontop and a smaller one on bottom. I use the same material that I serve my strings with.

JC · « **Reply #4 on:** May 15, 2007, 07:41:00 PM »

Anuther for tie on here.

BMOELLER · « **Reply #5 on:** May 15, 2007, 08:04:00 PM »

tie on

MAC · « **Reply #6 on:** May 15, 2007, 08:06:00 PM »

Tie on here too.

IB · « **Reply #7 on:** May 15, 2007, 08:21:00 PM »

Tie on..don't seem to move as easly.

Scott S. · « **Reply #8 on:** May 15, 2007, 08:33:00 PM »

Tie on (less wear on my tab, potentially less stress on string if not applied properly, and cheaper).

Ian johnson · « **Reply #9 on:** May 15, 2007, 08:35:00 PM »

gonna give tie on a try, currently brass

Blackhawk · « **Reply #10 on:** May 15, 2007, 08:45:00 PM »

I switched to tie-on a few years ago upon the urging of Steve Gorr. He felt the metal nock was not only tough on your glove, but it was also noiser.

Even though I could not tell the difference in noise, he insisted the metal against plastic has an audible "click" to it.

I guess if Steve can hear it, so could a deer.

Jason R. Wesbrock · « **Reply #11 on:** May 15, 2007, 09:02:00 PM »

I'll be the odd man out. I've tried tie-on nock sets but never really cared for them. For me, the brass ones are so easy and effective I can't imagine not using them.

JEFF B · « **Reply #12 on:** May 15, 2007, 09:07:00 PM »

i am going to be different i use tie ons LOL!!!

Orion · « **Reply #13 on:** May 15, 2007, 09:18:00 PM »

I do a little of each. I don't glue my tie-ons down once I have them set, and I have had one or two move on me. Of course, that's happened with the brass as well when I don't squeeze them tightly enough.

Jwilliam · « **Reply #14 on:** May 15, 2007, 09:29:00 PM »

Tie-On, because it dosen't wear on my glove.

Son of Texas · « **Reply #15 on:** May 15, 2007, 10:09:00 PM »

Tie-on it's easier to tune.

houseman · « **Reply #16 on:** May 15, 2007, 10:14:00 PM »

They still make brass nocks? Tie ons for me.

OzarkRamblr · « **Reply #17 on:** May 16, 2007, 12:48:00 AM »

Uh, tie on...'cause I do what every one else is doing. :rolleyes:

I use the individual strings from an old endless loop bow string. I have lots of 'em since I've switched to flemish strings on all my bows.

Hot Hap · « **Reply #18 on:** May 16, 2007, 04:02:00 AM »

Brass.

cjones · « **Reply #19 on:** May 16, 2007, 06:30:00 AM »

Brass here also.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Tie on or metal nock set? (Read 1629 times)

Users currently browsing this topic: