Author Topic: Your most used Broadhead weight? (Read 2632 times)

longbowman · « **Reply #40 on:** September 02, 2010, 09:54:00 AM »

200 gr. Ace

Tree Rat · « **Reply #41 on:** September 02, 2010, 10:05:00 AM »

John3 · « **Reply #42 on:** September 02, 2010, 10:07:00 AM »

145 total.. Zwickey two blade with adapter.

kat · « **Reply #43 on:** September 02, 2010, 10:11:00 AM »

200 grain Muzzy Phantoms with 100 grain inserts.

bornagainbowhunter · « **Reply #44 on:** September 02, 2010, 10:15:00 AM »

On my carbon arrows I use 125gr broadheads with brass adapters to build up to about 220gr. I do this so I can use 125gr judo points with the same arrows I deer hunt with. On my woodies I use 200gr Ace Super Express.

bucksdown · « **Reply #45 on:** September 02, 2010, 10:22:00 AM »

well i guess i had to be the odd ball, i shoot less than 50lbs. draw weight, and have been shooting 100gr. for 10 years. they fly good for me, and my other reason is i shoot three under, look down my shaft and it is dead on anywhere from 0 to 25yds. i would like to have more forward weight, and if anyone can tell me what to do i would give it a try.

yukon chuck · « **Reply #46 on:** September 02, 2010, 01:31:00 PM »

Thanks for all the replies guys. I figured most would fall between 145-160 grain heads, but I am surprised at how many are shooting much heavier heads than that. Interesting.

Terry Green · « **Reply #47 on:** September 02, 2010, 01:36:00 PM »

95% of the time - 175 grains - since the mid 80s.

That is normally a long aluminum adapter and a Zwickey Delta 4 blade making the 175 grains.

Frank Warnke · « **Reply #48 on:** September 02, 2010, 01:55:00 PM »

odd ball #2 - shooting 100gr screw in.

sswv · « **Reply #49 on:** September 02, 2010, 01:58:00 PM »

I use 125 grain multi-blade heads with a 50 grain brass insert which makes 175 grains up front.

Northwoods · « **Reply #50 on:** September 02, 2010, 02:00:00 PM »

160gr gule ons

TRAD101 · « **Reply #51 on:** September 02, 2010, 02:30:00 PM »

175 woodsmen elite, they are quiet as a mouse.

lt-m-grow · « **Reply #52 on:** September 02, 2010, 02:37:00 PM »

200 screw in. I like the weight up front and I can swap my BH's with 200 gr hex or hammer heads whenever.

And I cannot get anymore weight up front on my CE 350s. If I could, I would go with another 50 or 100 gr inserts and stick with the 200 gr heads.

toppredator · « **Reply #53 on:** September 02, 2010, 04:56:00 PM »

I use 2 blade magnus 125 gr.

Jason Hansen · « **Reply #54 on:** September 02, 2010, 05:04:00 PM »

I'll be using Ace 160gr. standard broadheads for this season.

Frenchymanny · « **Reply #55 on:** September 02, 2010, 05:04:00 PM »

Right now, 160 on woodies(snuffers), will be 260 on carbons (160 bh, 100 steel adaptor) Snuffers and 300 grs BigJim broadheads

F-Manny

KEG · « **Reply #56 on:** September 02, 2010, 11:55:00 PM »

I use 125 gr Stingers with 100 gr brass inserts with my carbons and 160 gr STOS with my woods.

mwosborn · « **Reply #57 on:** September 02, 2010, 11:58:00 PM »

135 zwickey.

DRR324 · « **Reply #58 on:** September 03, 2010, 08:17:00 AM »

150 gr Razorcap along with 75 gr adapter

1bjd · « **Reply #59 on:** September 03, 2010, 08:35:00 AM »

125 thunderheads also have some 100 grain.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Your most used Broadhead weight? (Read 2632 times)

Users currently browsing this topic: