3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 58" bob lee T/D recurve brace height???  (Read 253 times)

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2661
58" bob lee T/D recurve brace height???
« on: December 31, 2010, 06:39:00 PM »
i'm currently frustrated with the flight of my arrows out of my 58" 54#@28" bob lee T/D recurve. they seem to do a tight spiral more times than they fly like a dart.
80%-90% of shoots land to the left of the aiming point too. i think this is mainly a form issue though.
bare shafts tend to land to the left of broadheads. this got me thinking that my shafts might be a tad stiff. however i shot them yesterday with a 90gr point right through to 425gr points with little difference in arrow flight. i even packed out the side plate about 1/4" and tried everything.....same, sometimes it would fly great other times it would have a little tail wag.

my brace height is set at 7 5/8". i tried 8 1/4" and noticed that i finally got a bit better bare shaft flight. the arrows seemed to fly a bit better, however it was getting dark and i only had a few shots at this setting.

what's your 58" lee T/D brace height?

so frustrating and it does nothing for confidence when you can't get your arrows flying great every shot. i gave a hunting trip a miss this weekend cause i just don't feel confident in my setup now. spending some time this weekend trying to get it right. hopefully!

hard to believe that i can change point weight so much a not notice much difference at all.
your thoughts?
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Offline Kip

  • Trad Bowhunter
  • **
  • Posts: 1720
Re: 58" bob lee T/D recurve brace height???
« Reply #1 on: December 31, 2010, 07:09:00 PM »
Just went check mine.I have the exact wgt. on one of my Lees 54@28".I pull almost 29".Braced at 8" and shot O.K. for me this morning 2018's.I have gone as high as 8 1/2" for silence on some strings but with the Moutain Muffler it is quite at 8"Kip

Offline Brent Hill

  • Trad Bowhunter
  • **
  • Posts: 283
Re: 58" bob lee T/D recurve brace height???
« Reply #2 on: December 31, 2010, 07:26:00 PM »
I shoot a 60  and 62 inch and they both like 8 1/4.  I can't get them to settle in at 8 inch despite what is recommended.

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2661
Re: 58" bob lee T/D recurve brace height???
« Reply #3 on: December 31, 2010, 10:16:00 PM »
thanks guys.
 i'll keep at it.
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Online fisherick

  • Trad Bowhunter
  • **
  • Posts: 356
Re: 58" bob lee T/D recurve brace height???
« Reply #4 on: January 01, 2011, 09:14:00 AM »
My 54# 60"likes a 7 13/16" brace height, while my 43# 62" likes 8"

Offline oldtimerbow

  • Trad Bowhunter
  • **
  • Posts: 106
Re: 58" bob lee T/D recurve brace height???
« Reply #5 on: January 01, 2011, 09:40:00 AM »
8" to deepest part of grip and go from there.
oldtimerbow

Online ozy clint

  • Trad Bowhunter
  • **
  • Posts: 2661
Re: 58" bob lee T/D recurve brace height???
« Reply #6 on: January 01, 2011, 06:34:00 PM »
i had it at 8 1/4" yesterday and my arrows were flying good. i think i ironed out a form issue too. an open stance seems to have really helped with the hitting left issue.

i'll play a bit more around the 8" mark.
Thick fog slowly lifts
Jagged peaks and hairy beast
Food for soul and body.

Border black douglas recurve 70# and 58# HEX6 BB2 limbs

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©