3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: cx 150's the same as .400 spine?  (Read 451 times)

Offline kahunter

  • Trad Bowhunter
  • **
  • Posts: 173
cx 150's the same as .400 spine?
« on: January 11, 2011, 04:31:00 PM »
How do the Carbon Express spines compare?  

I need a new set of arrows for my 55# Black Swamp.  I am pulling about 49# at my draw length.  Epic 500 shafts are way too weak (with 200 grain point) and GT 55/75 shoot pretty good.  

I am thinking about trying some CX shafts, but I'm not sure which size to go with.
Logged

Offline NoCams

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2227
Re: cx 150's the same as .400 spine?
« Reply #1 on: January 11, 2011, 04:41:00 PM »
Carbon Express Heritage 250's should work for you but I am surprised the 150's don't ? Sounds like you got a 26" draw ? 150's spine at .460-.470 I think so they are a tad stiffer than the Epic 500. What length are your arrows ?
Logged
TGMM  Family of the Bow
"Failure to plan is planned failure"

Online Cocklebur

  • Trad Bowhunter
  • **
  • Posts: 182
Re: cx 150's the same as .400 spine?
« Reply #2 on: January 11, 2011, 04:49:00 PM »
I would think the 150's would work.
Logged

Offline kahunter

  • Trad Bowhunter
  • **
  • Posts: 173
Re: cx 150's the same as .400 spine?
« Reply #3 on: January 11, 2011, 04:56:00 PM »
I actually haven't tried the 150's yet.  I was just wondering how they matched up with the easton's and GT spine-wise.  

I don't think I would want to use the 250's because of how heavy they are, but I would hate to end up with 150's being too weak.  

I want to have 225 grains total up front, and end with around 500gr total arrow weight.
Logged

Offline BWD

  • Trad Bowhunter
  • **
  • Posts: 1550
Re: cx 150's the same as .400 spine?
« Reply #4 on: January 11, 2011, 04:57:00 PM »
CE Heritage 150s = .487 spine, 250s = .373
GT 55/75 = .400
Logged
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

Offline BWD

  • Trad Bowhunter
  • **
  • Posts: 1550
Re: cx 150's the same as .400 spine?
« Reply #5 on: January 11, 2011, 05:04:00 PM »
CE Heritage 150s weigh 10 grains/inch. Mine @ 28 3/4", std. insert, 200gr. heads. 5" feathers weigh in at 530 grains. I pull 26.5" on an r/d longbow that is around 50#s at that draw length.
Logged
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

Offline NoCams

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2227
Re: cx 150's the same as .400 spine?
« Reply #6 on: January 11, 2011, 05:05:00 PM »
You didn't tell us how long your draw is ? Carbons get stiff mighty fast with length changes and if you have a 26-27" draw you can shoot a short 150 that will be plenty stiff for you. You should be fine with the 150's. Thanks BWD for that spine chart for us all !!!
Logged
TGMM  Family of the Bow
"Failure to plan is planned failure"

Offline Patrick55

  • Trad Bowhunter
  • **
  • Posts: 36
Re: cx 150's the same as .400 spine?
« Reply #7 on: January 11, 2011, 05:14:00 PM »
If you stay with the 200 grain point you can shoot up to a 28" arrow in the 150. If you drop to a Heritage 90 and a 125 to a (145??) point you can shoot up to a 27" arrow. Every shooter is different but thats going to be real close.
Logged
Experience is a wonderful thing. It teaches to recognize a mistake when you do it again.

Offline Earl Jeff

  • Trad Bowhunter
  • **
  • Posts: 858
Re: cx 150's the same as .400 spine?
« Reply #8 on: January 11, 2011, 06:05:00 PM »
150
Logged

Offline highpoint forge

  • Trad Bowhunter
  • **
  • Posts: 1106
Re: cx 150's the same as .400 spine?
« Reply #9 on: January 11, 2011, 06:26:00 PM »
Why not go EFOC with a 250 unless your draw length prevents it or something.....? Heavy can't hurt.
Logged
Black Widow PSAX Bocote 57# @28, 58 AMO
Black Widow PLX Tiger Myrtle 60# @28, 64 AMO
J.D. Berry Osage Argos 60# @28, 66 AMO

Offline kahunter

  • Trad Bowhunter
  • **
  • Posts: 173
Re: cx 150's the same as .400 spine?
« Reply #10 on: January 11, 2011, 06:31:00 PM »
BWD, your setup is pretty close to mine.  I draw 26" so that should work for me.

I do want EFOC, but I don't want to shoot  "logs" either!
Logged

Offline metsastaja

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1165
Re: cx 150's the same as .400 spine?
« Reply #11 on: January 11, 2011, 07:25:00 PM »
Logged
Les Heilakka
TGMM Family of the Bow  
Some times the uneventful nights are just as good if not better than the eventful ones

Offline beachbowhunter

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2713
Re: cx 150's the same as .400 spine?
« Reply #12 on: January 11, 2011, 07:54:00 PM »
150s for sure.
Logged
Ishi was a Californian                   :cool:
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©