Author Topic: Interest in 1 1/4" VPA Terminators? Big Jim comes thru again! 1 1/4 glue on's (Read 3184 times)

Bowhunter4life · « **Reply #60 on:** January 23, 2011, 08:29:00 PM »

Oh, Curt did you want any?

BigJim · « **Reply #61 on:** January 24, 2011, 10:30:00 AM »

Ok, a lot of people have posted there intent on purchasing some 1 1/4" terminator broadheads. It will take a commitment of at least 18 dz heads before I will order. I have spoke With Bob Morrison and he has decided not to purchase so I will be the only one buying at this time. If you truly want these, PM me with your information and how many heads you will committ too.

They will cost $49.99 for 3 heads. There will be no discount for 1 dz or 10 dz. These are being sold under the normal markup at this price and can only be done with the initial order.
They will be 250 g screw in. heads and available in about 3 weeks after I place the order.

thanks, bigjim

Guru · « **Reply #62 on:** January 24, 2011, 12:04:00 PM »

Ok Fellas...there ya have, Big Jim is coming thru for us

BigJim · « **Reply #63 on:** January 25, 2011, 11:00:00 PM »

Guys, I have only been counting those that have made the effort to PM me. We are currently sitting at 8 doz. There are many more here who have expressed intent. Hopefully they come back to read this thread again. If you know them, let them know.

thanks, bigjim

jonsimoneau · « **Reply #64 on:** January 25, 2011, 11:13:00 PM »

I've never understood guys complaining about the cost of broadheads. There are hundreds of broadheads being made these days. None of the companys producing them are getting rich. If A guy was getting rich making broadheads...he would most likely be out of business due to the fact there are so many good ones out there. I mean how many broadheads do you really go through in a season? Most of them can be resharpened anyway. Sorry...but I just don't get the complaints. The VPA termintors are obviously a very fine head. If a certain head costs too much in your opinion...then just go with one of the HUNDREDS of lower cost ones. Otherwise...if you have a better broadhead design, that can be sold at a lower cost..then by all means do it!

Kevin Dill · « **Reply #65 on:** January 26, 2011, 07:41:00 AM »

I agree with Jon. I use knives that cost $25 and some that exceed $400. There's a price and quality range for everyone. I'm guessing it's easy to say "I'll take a dozen or two"...a little tougher to shuck out $200 to $400 when the time comes.

PM sent to BigJim and order in.

Guru · « **Reply #66 on:** January 26, 2011, 07:08:00 PM »

Com-on fellas

BigJim · « **Reply #67 on:** January 27, 2011, 06:59:00 PM »

We are at 13 dz right now. need a few dz more.

thanks,bigjim

FerretWYO · « **Reply #68 on:** January 27, 2011, 07:37:00 PM »

You dont get people to help you out like this to often

Boomerang · « **Reply #69 on:** January 27, 2011, 08:06:00 PM »

OK guys,
I stuck my neck out too. I ordered the steel today. It wasn't cheep.
We will start running them next week.

katman · « **Reply #70 on:** January 27, 2011, 09:00:00 PM »

YAHOOOOOOOOOOOO!!!!!!!!!!!

Guru · « **Reply #71 on:** January 28, 2011, 12:53:00 PM »

Quote

Originally posted by Boomerang:
OK guys,
I stuck my neck out too. I ordered the steel today. It wasn't cheep.
We will start running them next week.

Special thanks to Big Jim as well!!

Guru · « **Reply #72 on:** February 08, 2011, 08:45:00 AM »

Fellas...Big Jim has come thru again...there will also be 1 1/4" 200gr. glue-on's availible as well.

I know some guys were wanting a bigger size, but a glue-on....so here's your chance!

Get a hold of Big Jim

WESTBROOK · « **Reply #73 on:** February 08, 2011, 10:38:00 AM »

O.K. Ya got me now!!

Time to raid my copper pile again.

Eric

Charlie Lamb · « **Reply #74 on:** February 08, 2011, 10:43:00 AM »

Most excellent about the glue on's!!! Have to wait until first of next month, but I'm gonna have some.

Boomerang · « **Reply #75 on:** February 08, 2011, 05:53:00 PM »

I'm sending them off to heat treat tomorrow.

wapiti792 · « **Reply #76 on:** February 08, 2011, 09:05:00 PM »

Awwww right. Hopefully I got a bear in Manitoba that wants to take one of these in the wheelhouse

Thanks Big Jim!!!

L. E. Carroll · « **Reply #77 on:** March 08, 2011, 11:18:00 PM »

Was notified last night by email...these heads are in and ready to be paid for and shipped to those who ordered...

My 4 packs are in the mail to me now

Apex Predator · « **Reply #78 on:** March 09, 2011, 05:39:00 AM »

Yep, Big Jim called me and mine should be enroute today!

katman · « **Reply #79 on:** March 09, 2011, 07:14:00 AM »

Same hear got the confirmation email 4 packs are on there way to SC.

Ok now it is time to follow thru and purchase the heads committed to, don't leave Big Jim out hanging.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Interest in 1 1/4" VPA Terminators?** Big Jim comes thru again! 1 1/4 glue on's** (Read 3184 times)

Users currently browsing this topic:

Author Topic: Interest in 1 1/4" VPA Terminators? Big Jim comes thru again! 1 1/4 glue on's (Read 3184 times)