Bare shat 7595s nock high and left

[BigJim]

I can't believe that you are going to be able to get that shaft to shoot out of your bow. You must be hitting the riser and kicking out to the left. I shoot that same shaft out of my 85# bow with 400 g up front. If it was my set up, I would take that 5575 and put 300 total up front and cut shaft until it shot good.

Bigjim

[razorsharptokill]

Some how it works. I have some 5575s that have 300gr up front that I shot and trimed up. They still flop around. A full length 7595 bare shaft with a 145 gr field tip and a full length fletched shaft hit about 3" apart. The bare shaft being to the right. With a 200 gr point the bare shaft was about 6-8 inches right.

[razorsharptokill]

Shot a few arrows and shafts this evening. They are still full length. With a 145gr field point they are with hitting the same point of impact now. it seems like the bare shaft flys better than the fletched shaft. Weird.

[fishone]

If the bare shaft is flying better than the fletched, my guess is that you need to raise the nocking pt. about an 1/8" to let the fletching to clear the shelf.

[razorsharptokill]

I will try that. The bare shaft is showing impacting a little nock high though.