Author Topic: Dale Dye Riser Limb Attach ? (Read 240 times)

MJB · « **on:** February 28, 2011, 04:21:00 PM »

I didn't want to hijack the other post. All of the takedowns I seen have the bezel/allen bolt for limb attachment. Does he offer the bolts in the riser. Where you would use the nob like a Silvertip.
Thanks
Mike

cacciatore · « **Reply #1 on:** February 28, 2011, 04:45:00 PM »

Never seen one that way Mark,but I don't think it is difficult to have them made so.When Dave was going to finish my 2 risers I asked for the Allen bolts,that I prefere,but he had already prepared the riser with the bedded bolts,when I asked him if it were possible to change it he asnswered that it was not a problem,so I immagine everybody can do that.

MJB · « **Reply #2 on:** February 28, 2011, 04:49:00 PM »

Thanks Felix

cacciatore · « **Reply #3 on:** February 28, 2011, 04:51:00 PM »

You Welcome Mark.

Sixby · « **Reply #4 on:** February 28, 2011, 06:18:00 PM »

It would be a small thing to just screw in a headless allthread. You could superglue it if you wanted it to be permanent. Or JB weld it.

News:

Author Topic: Dale Dye Riser Limb Attach ? (Read 240 times)

MJB

Dale Dye Riser Limb Attach ?

cacciatore

Re: Dale Dye Riser Limb Attach ?

MJB

Re: Dale Dye Riser Limb Attach ?

cacciatore

Re: Dale Dye Riser Limb Attach ?

Sixby

Re: Dale Dye Riser Limb Attach ?

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS