Author Topic: Turkey heads, your picks (Read 549 times)

mnbearbaiter · « **Reply #20 on:** March 02, 2011, 05:22:00 PM »

Would love to see Muzzy make the Phantom in a glue on

Mike Gerardi · « **Reply #21 on:** March 02, 2011, 07:03:00 PM »

160 Snuffers and VP Terminators.

Interseptor · « **Reply #22 on:** March 02, 2011, 07:35:00 PM »

Mike,
Tell me you didn't sell the Tip that you had at ETAR two years ago!
Doug

Don Batten · « **Reply #23 on:** March 02, 2011, 07:41:00 PM »

Ive killed them with Magnas I's and Razorcaps, but today I got some heads from Big Jim. The 300gn 3 blades. I'm thinking these will be on my arrow for a while. DB

MJB · « **Reply #24 on:** March 02, 2011, 08:17:00 PM »

Quote

Originally posted by Interseptor:
Mike,
Tell me you didn't sell the Tip that you had at ETAR two years ago!
Doug

No worries my Friend. I still have that one

The one in the pic was another onepiece.

joe skipp · « **Reply #25 on:** March 02, 2011, 09:13:00 PM »

My Sitka Spruce arrows will be tipped with these...

Large 160 gr Snuffers....

Charles Sorrells · « **Reply #26 on:** March 02, 2011, 10:12:00 PM »

G5 Striker Magnum 125 grain, 1.5 inch cut fixed three blade.

Does the trick every time. Thinking of adding some insert weight to bump it up a bit, but have not found that I need it yet. As most, I like to play around with gear.

Overspined · « **Reply #27 on:** March 03, 2011, 09:09:00 AM »

I have had horrible luck with Montec heads. On turkeys they should be OK, but on big game, they break at the threads A LOT! I have had it happen on deer 2 times...so I quit using them. They are some sort of funny steel that breaks a whole lot easier than machined solid steel. Their small game points break all the time too. I quit using their brand because of it. Just my experience and opinion.

Shane H · « **Reply #28 on:** March 03, 2011, 09:45:00 AM »

I'll add another for 160 gr. snuffers.

kbaamigo · « **Reply #29 on:** March 03, 2011, 04:12:00 PM »

Turkies are tough. Only 160 Snuffers for me.

Friend · « **Reply #30 on:** March 03, 2011, 09:41:00 PM »

TNP broadheads for my gobs!

D.Sheppard · « **Reply #31 on:** March 26, 2011, 10:13:00 PM »

Did a little cutting and grinding on a Herters-Ram MX. All I need is a turkey !

With a insert it still weighs over 180gr.

Over&Under · « **Reply #32 on:** March 26, 2011, 11:07:00 PM »

Snuffer for me!

LITTLEBIGMAN · « **Reply #33 on:** March 26, 2011, 11:18:00 PM »

vpa 200 grain

John Nail · « **Reply #34 on:** March 27, 2011, 09:12:00 AM »

Turkeys are the only animal for which I use a 3-blade. I bought a bunch of Bodkin "seconds" some years ago, and I like the way they tune and fly. I have killed 3 turkeys with them and see no reason to change.

DBinAlamo · « **Reply #35 on:** March 27, 2011, 12:10:00 PM »

I've had good luck with my Woodsman Elites....DB

cody94 · « **Reply #36 on:** March 27, 2011, 01:45:00 PM »

first turkey hunt, made a special arrow, its a snuffer, lets hope i dont miss.

cody94 · « **Reply #37 on:** March 27, 2011, 01:57:00 PM »

beast broadhead man

LCH · « **Reply #38 on:** March 27, 2011, 04:46:00 PM »

Simmons for me.LCH

treetoppredator · « **Reply #39 on:** March 27, 2011, 07:26:00 PM »

I'm going to try the simmons treeshark 190 grain, be my first year using this broadhead, or tradgear for that matter!


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Turkey heads, your picks (Read 549 times)

Users currently browsing this topic: