3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Tell me your 600+gr arrow set up for 52lbs@27in  (Read 401 times)

Offline FrankM

  • Trad Bowhunter
  • **
  • Posts: 382
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #20 on: May 01, 2011, 12:31:00 AM »
See sig below.

Offline Wheels2

  • Trad Bowhunter
  • **
  • Posts: 1040
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #21 on: May 01, 2011, 06:38:00 AM »
Easton makes a FMJ in a heavier wall and weight called DANGEROUS GAME.  They might be too stiff for your set up though.
Super Curves.....
Covert Hunter Hex9h
Morrison Max 6 ILF
Mountain Muffler strings to keep them quiet
Shoot as much weight as you can with accuracy

Offline tiur

  • Trad Bowhunter
  • **
  • Posts: 93
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #22 on: May 01, 2011, 02:55:00 PM »
Hi, Morrison shawnee 60"48@28 - easton axis 500 cut to 28.5 or axis 400 cut to 29.5 all with 300gr up front weight  610 -620gr point on at approx 37yards

Offline Jeff Mundy

  • Trad Bowhunter
  • **
  • Posts: 103
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #23 on: May 01, 2011, 03:07:00 PM »
Full length Beman MFX w/ the 75 grn. insert & 200 grn. point shoot great out of my 50 lbs. @ 28" setup

Offline WESTBROOK

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3385
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #24 on: May 01, 2011, 05:53:00 PM »
31" 2018 with a 200g VPA on the front, 620g.

Eric

Offline BradLantz

  • Trad Bowhunter
  • **
  • Posts: 474
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #25 on: May 01, 2011, 07:06:00 PM »
ICS 400 shafts, yellow Carbon Express weight tubes, 220 gr Steel Force single bevel broadheads ... worked well 2 of the last 3 years out of my marked 52 @ 27 Zipper

Online wislnwings

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 854
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #26 on: May 01, 2011, 08:50:00 PM »
I shoot 27" draw and similar weight and this year's elk arrows are Grizzlystik Sitkas with the brass inserts, wraps, 3 - 5 1/2" sheild cut feathers, and topped off with 315gr Grizzlystik Ashby broadheads.  Total arrow weight is right at 600 grains.

Offline BowMIke

  • Trad Bowhunter
  • Posts: 839
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #27 on: May 02, 2011, 09:18:00 AM »
29" Beman MFX Classic 400"s with 100 grain brass insert and Centaur Big Game Head. Weighs around 625 grains.

Offline bowisbest

  • Trad Bowhunter
  • **
  • Posts: 8
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #28 on: May 02, 2011, 12:50:00 PM »
Hi Guys,
Thanks everyone for your input.  Great suggestions and other opinions have helped me a lot to narrow down some of my choices and to put together a great hunting arrow.  I appreciate all the perspectives, definately helps to see the good and bad of going with a heavy hitter or a lighter weight arrow and flatter trajectory.  Anyone else feel free to give more suggetions.  Thanks again.

Joel

Offline b44mag

  • Trad Bowhunter
  • **
  • Posts: 397
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #29 on: May 02, 2011, 06:41:00 PM »
i bought a set trad only 500's on here 30 bop with 5 gpi weight tubes 125 tips 605
3 rivers made up

Offline wtpops

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2323
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #30 on: May 02, 2011, 07:22:00 PM »
My draw is a lot longer than 27 but a 2020 my work out for you
TGMM Family of the Bow
"OVERTHINKING" The art of creating problems that weren't even there!

Offline ShadeMt

  • Trad Bowhunter
  • **
  • Posts: 220
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #31 on: May 03, 2011, 12:07:00 PM »
For my 54 lb at 26" elk set up I have CE Heritage 150s with 100 grain brass inserts, 3 5" feathers then stuff the 27" shafts with 30" of clothes line rope inside.  On the front I shoot a 2 blade Magnus and total weight comes in around 640 grains.

Offline snag

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6337
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #32 on: May 03, 2011, 02:33:00 PM »
54#@28" Blacktail VL Elite recurve shooting 80#-85# Surewood Shafts (the best douglas fir!) cut to 29"bop with 160gr heads = 585gr to 600gr.
Isaiah 49:2...he made me a polished arrow and concealed me in his quiver.

Offline maineac

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4005
Re: Tell me your 600+gr arrow set up for 52lbs@27in
« Reply #33 on: May 03, 2011, 02:41:00 PM »
Interesting combos.  Always like to see what others are shooting.  I shoot CX's.  I started with 250's because Stu's calc.  said I couldn't put enough weight as I wanted up front, but I have trouble with the calculator.  I found that I can shoot the same weight combo up front with 150's and 250's if the 250's are 1.5" longer than the 150's.  Whether your bow is center cut of not will also affect the arrow spine, so start long and shorten the shaft until you get the right length, no matter what shaft you end up trying.
The season gave him perfect mornings, hunter's moons and fields of freedom found only by walking them with a predator's stride.
                                                              Robert Holthouser

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©