3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: GT Nocks breaking. . .  (Read 486 times)

Offline Yeoman Bowman

  • Trad Bowhunter
  • **
  • Posts: 69
GT Nocks breaking. . .
« on: May 29, 2011, 12:03:00 PM »
Has anyone had trouble with GT nocks breaking?

I shot my Martin Savannah yesterday. It's 40# & so I shoot lightweight 1535 GT trads. (29.5" BOP, with 125 gr tips). They fly very well.

I was stump shooting & within an hour broke 5 nocks on 5 arrows.    :(    :confused:    

They seem to break on ground contact, not on release from the string. I think the arrow hits something solid, & the vibration snaps the nock inside the arrow. Every one broke off inside the arrow shaft. They are not glued in, so I think I can hook & pull them out & replace them with better nocks.

Has anyone else had this problem? Any suggestions on a better arrow & nock setup for a 40# bow?

Thanks,

Yeoman
Yeoman
_ _ _ __ _  _  _  

35# Martin Hunter
40# Martin Savannah
40# Martin Dreamcatcher
50# Bear Montana
_ _ _ _________ _  _  _

"When it’s time to die, let us not discover that we have never lived." -Henry David Thoreau

Offline huntingarcher

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1020
Re: GT Nocks breaking. . .
« Reply #1 on: May 29, 2011, 12:14:00 PM »
I had that happen to me also with some 35/55.I had about 4 break that was from the same package.I replaced all of them and have not had it happen any more.Maybe nocks were old or a bad batch.
IF MONEY TALKS MINE SAYS GOODBY

Offline huntingarcher

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1020
Re: GT Nocks breaking. . .
« Reply #2 on: May 29, 2011, 12:18:00 PM »
Also I used a small wood screw and some pliers to get the broken piece out.
IF MONEY TALKS MINE SAYS GOODBY

Offline Yeoman Bowman

  • Trad Bowhunter
  • **
  • Posts: 69
Re: GT Nocks breaking. . .
« Reply #3 on: May 29, 2011, 12:39:00 PM »
The wood screw is a good idea. I hadn't thought of that. Thanks.

Did you replace them with GT nocks or some other brand?

Yeoman
Yeoman
_ _ _ __ _  _  _  

35# Martin Hunter
40# Martin Savannah
40# Martin Dreamcatcher
50# Bear Montana
_ _ _ _________ _  _  _

"When it’s time to die, let us not discover that we have never lived." -Henry David Thoreau

Offline BWD

  • Trad Bowhunter
  • **
  • Posts: 1550
Re: GT Nocks breaking. . .
« Reply #4 on: May 29, 2011, 12:50:00 PM »
The only nocks I've had problems with were the ones that fit heritage 90s., except they were breaking on release. Figured they were too small for someone who sands their nocks the fit the serving. They would start breaking after a few hundred shots, or so. Quit shooting 90s...problem solved.
"If I had tried a little harder and practiced a little more, by now I could have been average"...Me

Offline bryan r

  • Trad Bowhunter
  • **
  • Posts: 131
Re: GT Nocks breaking. . .
« Reply #5 on: May 29, 2011, 12:58:00 PM »
I've had similar issues with GT nocks. Switched to Bohning Signature and haven't had any problems. Solid fit and durable.

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: GT Nocks breaking. . .
« Reply #6 on: May 29, 2011, 01:01:00 PM »
I had that happen also but on firing the bow.I wasn't too happy about it either.The same as dry firing the bow.

I got rid of every GT nock and replaced them with Signature nocks from 3Rivers.Problem solved.

The Gold Tip arrows are good but I can't afford to lose a good bow due to cheap nocks.

Offline huntingarcher

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 1020
Re: GT Nocks breaking. . .
« Reply #7 on: May 29, 2011, 01:07:00 PM »
Yeoman,the nocks have GT on the side of them,but can't remember if there Gold Tip nocks or Bohning.The nocks that were breaking were the same ones which leads me to thinking they were just a bad batch or something.I have never had any of the old style GT nocks (set screw) break but I never liked the looks of them.
IF MONEY TALKS MINE SAYS GOODBY

Offline Hermon

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2127
Re: GT Nocks breaking. . .
« Reply #8 on: May 29, 2011, 01:33:00 PM »
Only had one break on me so far.  On getting them out, someone on hear suggested just unscrewing the point and using it to remove the broken nock.  Worked great for me, and handy too.

Offline jimmerc

  • Trad Bowhunter
  • **
  • Posts: 920
Re: GT Nocks breaking. . .
« Reply #9 on: May 29, 2011, 01:40:00 PM »
I've been shooting gt trads for awhile now and haven't had that problem yet! Hope this didn't jinks me!!
1- kajika stik combo,RC 55@28/LONGBOW 57@28 Both W/diamondback skins

1- monarch longbow royal 68" 59@28
1- bear kodak hunter-44@28

Offline sticbow

  • Trad Bowhunter
  • **
  • Posts: 357
Re: GT Nocks breaking. . .
« Reply #10 on: May 29, 2011, 01:41:00 PM »
i hate them ...cant hit anything hard the nocks break..i will try the bohning nocks

Offline Eugene Slagle

  • Trad Bowhunter
  • **
  • Posts: 1049
Re: GT Nocks breaking. . .
« Reply #11 on: May 29, 2011, 02:03:00 PM »
I've had the clear colored nock break on me but rarely have any of the solid white one break.

I usually take a sheet rock screw & pull the broken piece out with that.
Zona Custom Recurve: 60" 49# @ 27.5".
Sky Sky Hawk Recurve: 60" 47# @ 27.5".
Genesis 27:3 Now therefore, please take thy weapons, thy quiver and thy bow, and go out to the field, and hunt game for me.

Offline LCH

  • Trad Bowhunter
  • **
  • Posts: 502
Re: GT Nocks breaking. . .
« Reply #12 on: May 29, 2011, 03:54:00 PM »
I have shot them since they came out and never had one break from just normal use. I have had them break after hitting them with another arrow. LCH

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: GT Nocks breaking. . .
« Reply #13 on: May 29, 2011, 05:47:00 PM »
I haven't had any problems with GT nocks,I even use them in my Carbon Express and Blackhawk Vapors.

Offline Reaper TN

  • Trad Bowhunter
  • **
  • Posts: 563
Re: GT Nocks breaking. . .
« Reply #14 on: May 29, 2011, 07:57:00 PM »
I got a pack of ugly pale yellow GT nocks once, and I broke several of them, seemed like they were brittle.  Never had problems with any others though.  I footed some GT 3555's a few weeks ago and have been stumpin' with them quite a bit, no problems (white nocks).  Yeoman, I think me and you must have got a bad batch of nocks.
TT Pinnacle II  45# 62"
Hoyt Excel  50# 64"

Offline sticbow

  • Trad Bowhunter
  • **
  • Posts: 357
Re: GT Nocks breaking. . .
« Reply #15 on: May 29, 2011, 08:02:00 PM »
we stump every sunday...break the white nocks all the time

Offline curly birch

  • Trad Bowhunter
  • **
  • Posts: 10
Re: GT Nocks breaking. . .
« Reply #16 on: May 29, 2011, 08:49:00 PM »
I shoot GT trad 1535s and on target/3D shoots have not had any problems with nocks breaking through regular use.  However if I hit something hard that the arrow won't stick in, the nock will break exactly as you've describe - about 0.5 inch of nock left inside the shaft.

I usually just unscrew a point, thread into the broken nock, and pull out the broken piece.

Offline tradhunter

  • Trad Bowhunter
  • **
  • Posts: 358
Re: GT Nocks breaking. . .
« Reply #17 on: May 29, 2011, 09:50:00 PM »
The solid color nocks are not as brittle as the see through or clear nocks.Usually if ya stick with the solid color nocks ya wont have trouble with them snappin,less your good enough to hit em with the other arrows.
The wishbone will never replace the backbone.

Offline Tatersalad

  • Trad Bowhunter
  • **
  • Posts: 328
Re: GT Nocks breaking. . .
« Reply #18 on: May 29, 2011, 10:26:00 PM »
White ones never break...got two dozen ruby colored knocks and i'v busted at least 4 already.  Seem like the colored ones are the problem.  Any one else have similar experience?

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: GT Nocks breaking. . .
« Reply #19 on: May 29, 2011, 11:12:00 PM »
I had 4 white ones out of a dozen break.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©