3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Favorite use for broken carbon/aluminum arrows?  (Read 439 times)

Offline Davesea

  • Trad Bowhunter
  • **
  • Posts: 279
Favorite use for broken carbon/aluminum arrows?
« on: July 13, 2011, 02:31:00 PM »
After reading that spit balls was one of Howard Hills favorite past times, I found that carbon shafts make a great spit ball tube....  Introduced my 7year old to it and she had fun....

How do you re-use your broken shafts?
"Anyone can make a bow, but it takes skill and experience to make an arrow"  ISHI

Offline TxAg

  • Trad Bowhunter
  • **
  • Posts: 2910
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #1 on: July 13, 2011, 02:44:00 PM »
keep a few on hand to make sharpening easier.

i like the spitball idea!

Offline stevewills

  • Trad Bowhunter
  • **
  • Posts: 777
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #2 on: July 13, 2011, 04:07:00 PM »
i use bent aluminums for my cherry tomatoes
i like biscuits

Offline Hogdgz

  • Trad Bowhunter
  • **
  • Posts: 107
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #3 on: July 13, 2011, 06:14:00 PM »
Use them for my turkey decoys, cause i am always looseing the stakes that came with the decoys.

Offline WPAtrapper

  • Trad Bowhunter
  • **
  • Posts: 250
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #4 on: July 13, 2011, 06:32:00 PM »
Quote
Originally posted by Hogdgz:
Use them for my turkey decoys, cause i am always looseing the stakes that came with the decoys.
Same here. I cut old carbons in half then glue a slightly larger diameter piece of aluminum to one end,kind of like a footing but leave about an inch or two of over hang. This way you can break the stake down into two pieces for easy transport.
60" RER LX 46@28"

Offline lpcjon2

  • Trad Bowhunter
  • **
  • Posts: 7667
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #5 on: July 13, 2011, 07:25:00 PM »
Take the nock ends and cut them 4" long and drill  holes into a piece of wood and epoxy them in.they make great coat,hat or bow racks. And always keep a short nock end for tying nock points on it makes a great guide. And the aluminum arrow pieces can be made into a wind chime with an old broadhead (dull of course) as the center piece for them to clng against.
Some people live an entire lifetime and wonder if they have ever made a
difference in the world, but the Marines don’t have that problem.
—President Ronald Reagan

Offline Good Stuff

  • Trad Bowhunter
  • **
  • Posts: 33
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #6 on: July 13, 2011, 08:03:00 PM »
When I did some offshore fishing I would take a aluminum shaft around 12" long and file one end sharp with a file. I used it to remove the eyeballs from my Ballyhoo when I preped them for a days fishing offshore

Offline mrjsl

  • Trad Bowhunter
  • **
  • Posts: 283
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #7 on: July 13, 2011, 08:55:00 PM »
threatening the coon dogs!

Offline Wapiti Chaser

  • Trad Bowhunter
  • **
  • Posts: 1299
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #8 on: July 13, 2011, 09:45:00 PM »
Foot carbons with alum, made a bow rack with alum and am going to try making turkey call strikers with carbon. Course these are all other peoples broken arrows   :eek:
" Take a kid bowhunting"
New York Bowhunters BOD
PBS Member

Offline don s

  • Trad Bowhunter
  • **
  • Posts: 625
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #9 on: July 13, 2011, 09:48:00 PM »
i cut my alums into different lengths and make them into wind chime/sculptures.  :campfire:   don
 

Offline Night Wing

  • Trad Bowhunter
  • **
  • Posts: 2944
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #10 on: July 13, 2011, 10:01:00 PM »
They prop up my bag target when the target is on the ground. It makes it easy for me to move the bag target around to different spots like just peaking out from behind a bush.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. GPP: 11.37

Offline zipper bowss

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 2700
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #11 on: July 13, 2011, 10:10:00 PM »
I have never lost or broken an arrow in my life.   :biglaugh:      :laughing:   Sorry I just wanted to see if I could get through that with a strait face.NOPE, Could not do it!
Bill

I'm with mrjsl

Offline hedgetree

  • Trad Bowhunter
  • **
  • Posts: 114
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #12 on: July 13, 2011, 10:26:00 PM »
I also use them as tomatoe stakes.

Offline Kenneth

  • Trad Bowhunter
  • **
  • Posts: 1206
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #13 on: July 13, 2011, 10:34:00 PM »
I've made a few into short pieces for sharpening b-heads and spin testing b-heads that I glue onto adapters, I just finished making a coat rack for my apartment with a few shorter pieces for the pegs and 2 longer pieces I fletched up and put on the ends; it looks pretty good.  I've also used them as a mag plug for my waterfowling bow   ;)
Chasing my kids and my degree for now but come next fall the critters better look out.  ;)

Offline Kenneth

  • Trad Bowhunter
  • **
  • Posts: 1206
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #14 on: July 13, 2011, 10:38:00 PM »
Just thought of this: It seems like a good way to carry a few matches in a short piece by sealing off one end and using a tight fitting nock on the other.

Edit:  The more I think about this I think I'm gonna make one and drill a small hole through the nock so it can be worn as a keychain or necklace.
Chasing my kids and my degree for now but come next fall the critters better look out.  ;)

Offline polarbear

  • Trad Bowhunter
  • **
  • Posts: 94
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #15 on: July 13, 2011, 11:49:00 PM »
If you have enought shaft? Make them up for the KIDS!!
Does your train of thought Have a caboose?

Offline polarbear

  • Trad Bowhunter
  • **
  • Posts: 94
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #16 on: July 13, 2011, 11:51:00 PM »
MAKE THEM UP FOR THE KIDS!
Does your train of thought Have a caboose?

Offline joekeith

  • Trad Bowhunter
  • **
  • Posts: 1757
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #17 on: July 14, 2011, 12:46:00 AM »
I use 'em close to a foot long, put on pink wrap and 5" pink feathers left full height.  I slip this over the wife's antenna on the top of her car so she can find it in parking lots.  That pink really stands out....  :bigsmyl:

Offline bosteldr

  • Trad Bowhunter
  • **
  • Posts: 142
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #18 on: July 14, 2011, 07:20:00 AM »
I tape reflective tape to the end and use them as driveway marker in the winter.  I stick and arrow in the ground about every 15 to 20 yds or so. My driveway is about 400 ft long.  Usually the snow is not over 18 inches here in Ohio.  Works great, looks just like driving down airport runway at night.

Offline misfire

  • Trad Bowhunter
  • **
  • Posts: 501
Re: Favorite use for broken carbon/aluminum arrows?
« Reply #19 on: July 14, 2011, 01:27:00 PM »
I use them to fill up an empty box I had laying around...
Mark

"The shortest distance from the earth to your mouth is the best." ~Wendell Berry~

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©