3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: dalaa questions  (Read 352 times)

Offline Sambar

  • Trad Bowhunter
  • **
  • Posts: 123
dalaa questions
« on: August 08, 2011, 08:06:00 PM »
im thinking of getting a 3 rivers dalaa and was wondering if anyone has shot vanes out of these with an elevated rest? is there enough height from the plunger hole to the shelf to give them enough clearance as there is that bump on the shelf i am worried about.
Those who hunt miss... those who don't hunt miss far more.
Time spent without bow or rod in hand is time forever wasted.

Offline Jeff Mundy

  • Trad Bowhunter
  • **
  • Posts: 103
Re: dalaa questions
« Reply #1 on: August 08, 2011, 08:34:00 PM »
If you're gonna shoot off of the shelf you'll be using that "bump" as a rest. If you use an elevated rest & plunger combo it will not interfere at all.

Offline Sambar

  • Trad Bowhunter
  • **
  • Posts: 123
Re: dalaa questions
« Reply #2 on: August 09, 2011, 05:24:00 AM »
Cool so are you saying that bump is removable or is the hole for the elevated rest high enough from the rest so it will clear the bump with vanes?
Those who hunt miss... those who don't hunt miss far more.
Time spent without bow or rod in hand is time forever wasted.

Offline xtrema312

  • Trad Bowhunter
  • **
  • Posts: 3163
Re: dalaa questions
« Reply #3 on: August 09, 2011, 08:07:00 AM »
:campfire:
1 Timothy 4:4(NKJV)
For every creature of God is good, and nothing is to be refused if it is received with thanksgiving.

Firefly Long Bow  James 4:14
60" MOAB 54@29 James 1:17

Michigan Longbow Association

Offline Jeff Mundy

  • Trad Bowhunter
  • **
  • Posts: 103
Re: dalaa questions
« Reply #4 on: August 09, 2011, 08:25:00 AM »
The plunger hole is elevated... the bump is permanent unless you want to grind it off.

Offline Turkeys Fear Me

  • Trad Bowhunter
  • **
  • Posts: 263
Re: dalaa questions
« Reply #5 on: August 09, 2011, 08:44:00 AM »
I have a friend that had one and he  did  have interference with the bump, especially with Blazer vanes.

Offline Sambar

  • Trad Bowhunter
  • **
  • Posts: 123
Re: dalaa questions
« Reply #6 on: August 09, 2011, 11:08:00 AM »
Cheers mate I would be using standard 4" vanes as they are a little narrower than the blazers. But bye the sound of it, it may still be a problem.
Those who hunt miss... those who don't hunt miss far more.
Time spent without bow or rod in hand is time forever wasted.

Offline Turkeys Fear Me

  • Trad Bowhunter
  • **
  • Posts: 263
Re: dalaa questions
« Reply #7 on: August 09, 2011, 11:27:00 AM »
My question to you would be this.  If you are planning to shoot off an elevated rest, why choose a riser that has a bump at all when there are others available without them?  There is no chance of interference with the bump if it isn't there.

g'day   :thumbsup:

Offline Sambar

  • Trad Bowhunter
  • **
  • Posts: 123
Re: dalaa questions
« Reply #8 on: August 09, 2011, 07:53:00 PM »
Yes very true but I would like to shoot it off the shelf too with feathers
Those who hunt miss... those who don't hunt miss far more.
Time spent without bow or rod in hand is time forever wasted.

Offline excelpoint

  • Trad Bowhunter
  • **
  • Posts: 360
Re: dalaa questions
« Reply #9 on: August 10, 2011, 02:06:00 AM »
I don't own one but have shot a few. I did not see any issues shooting 3 or 4" vanes off an elevated rest. My 17" Sky also has a bump on the shelf. I shoot 3" AAE Elite vanes off a rest for hunting with no clearance issues. I shoot cock vane in and slightly down as I do with all the trad bows I have owned.
"A hunt based only on trophies taken falls short of what the ultimate goal should be ... time to commune with your inner soul as you share the outdoors with the birds, animals, and the fish that live there."
Fred Bear

Offline Turkeys Fear Me

  • Trad Bowhunter
  • **
  • Posts: 263
Re: dalaa questions
« Reply #10 on: August 10, 2011, 07:11:00 AM »
Quote
Originally posted by Sambar:
Yes very true but I would like to shoot it off the shelf too with feathers
I heard that Trad Tech is coming out with a removable radiused shelf for their Titan risers.  For the people that want to shoot off the shelf, you simply install it and use a regular rug and sideplate.  If you want to shoot off a rest, you remove it and there is no chance of it getting in the way.

That might be a consideration for you.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©