3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Why no spine charts for heavy  (Read 383 times)

Offline huntnut

  • Trad Bowhunter
  • **
  • Posts: 220
Why no spine charts for heavy
« on: July 05, 2007, 10:23:00 AM »
Why no spine charts for heavy heads? Like from 150gr to 300gr. I just see alot of guys guessing on there arrow setups aluminum and carbons me included, because there are no charts for us that use heavy braodheads.
Bear Grizzly 50#@28

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Why no spine charts for heavy
« Reply #1 on: July 05, 2007, 10:27:00 AM »
Because the trend has been for lighter heads in the compound world and it takes time, thus money to create such charts and there isn't enough of a return in the arrow manufacturers eyes to justify the expense.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Why no spine charts for heavy
« Reply #2 on: July 05, 2007, 05:59:00 PM »
It is not really a guessing game though. If ya use some common sense, ya can get darn close on what heads ya need. Shawn
Shawn

Offline Voodoofire1

  • Trad Bowhunter
  • **
  • Posts: 309
Re: Why no spine charts for heavy
« Reply #3 on: July 05, 2007, 07:24:00 PM »
No offence Shawn, but for me close is only good in horseshoes and hand grenades, my arrows must fly perfect or I'm not releasing on a live animal,in my opinion there's just to many variables in trad set-ups to have a chart, because there's just no way they can shoot what I shoot the way I shoot it, I got my hunting setup done yesterday, took a whole 20 min. of experimenting
True happiness is not having what you want, it's wanting what you have!

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Why no spine charts for heavy
« Reply #4 on: July 05, 2007, 07:34:00 PM »
Mine do too, my point is that ya have to experiment, but it is not that difficult to find a starting point if ya use some common sense. Look at his post though, that is what I was addressing. If ya shoot heavy heads ya should know that ya have to increase the spine over what ya would normally shoot, If ya are gonna increase point weight by 100 grains than ya should know ya want at least 10#s or more of spine, but than again what is heavy. I shoot 125 grain heads but use a lot of weight up front with brass inserts and such. Trust me I have seen what is exceptable flight for most guys and I would not be caught dead shooting there set-ups. Davids response was right on. Shawn
Shawn

Offline AllenR

  • Trad Bowhunter
  • **
  • Posts: 214
Re: Why no spine charts for heavy
« Reply #5 on: July 05, 2007, 09:13:00 PM »
You might try OnTarget2 software.  It is primarily for wheelie bows, but it does have a setting for recurves.  It allows you to look at hundreds of different arrows with some expetation of it actually working for your bow.

Since every bow and every archer is differnt, it is just a starting place.  You still have to tune the arrow to you and your bow.  I've had pretty good success with it.

I think that you can still preview it for free to see if you like it.

It lets you enter point weights up to 400 grains.

Offline NorthShoreLB

  • Trad Bowhunter
  • **
  • Posts: 634
Re: Why no spine charts for heavy
« Reply #6 on: July 06, 2007, 07:17:00 AM »
Charts can't substitute hands on, ....agree with Shawn, common sense to start and some experimenting, ...and you got game
"Almost none knows the keen sense of satisfaction which comes from taking game with their own homemade weapons"

-JAY MASSEY-

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©