3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Carbon arrows for a 35# longbow  (Read 506 times)

Offline vermontrad

  • Trad Bowhunter
  • **
  • Posts: 114
Carbon arrows for a 35# longbow
« on: July 09, 2007, 09:22:00 PM »
What do you think? I use 29" arrows. Anyone know what carbons might work? I hear they don't like the light bows much.???
"Only a fool lean upon his own misunderstanding" -B.Marley

Offline Toxophilite

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 200
Re: Carbon arrows for a 35# longbow
« Reply #1 on: July 09, 2007, 09:58:00 PM »
Take a look at Shawn Leonard's thread on this page about CE Thunderstorm SE carbon arrows...
They might be just the ticket.
I'm only as good as my first shot.

Offline Bow Nut

  • Trad Bowhunter
  • **
  • Posts: 24
Re: Carbon arrows for a 35# longbow
« Reply #2 on: July 09, 2007, 10:28:00 PM »
I would suggest Blackhawk Vapor Carbonwood 2000 series. They look like wood arrows and are a little hard to find but they are the only carbons I've found that work well out of lighter bows ( 25 - 45# ). Make sure they are the 2000 series. With 5" helical fletch and 145 grain field points with the factory inserts they fly great from my daughters 30# longbow at her 25" draw with 27" BOP to nock groove. You might have to reduce point weight if you have a longer draw and you might have to raise your knocking point a little if you don't cant very much. I saw them advertised on Custom King's website about 2 years ago and ordered them through my local archery shop. If I remember right they were about 84 bucks for a dozen. They are quality carbon shafts. I've been told that Gold Tip also makes a light traditional looking shaft but I've never seen any. Hope this helps.
We cast our best shadow when we stand in the light of 'The Son'

Offline hawk22

  • Trad Bowhunter
  • **
  • Posts: 373
Re: Carbon arrows for a 35# longbow
« Reply #3 on: July 09, 2007, 10:52:00 PM »
Easton ST Epic 600's. They shoot very well out of my girlfriend's 39# and 35# bows.

Offline Bowchef

  • Trad Bowhunter
  • **
  • Posts: 71
Re: Carbon arrows for a 35# longbow
« Reply #4 on: July 09, 2007, 10:56:00 PM »
GT Entrada 600
Doug

Offline dachba

  • Trad Bowhunter
  • **
  • Posts: 175
Re: Carbon arrows for a 35# longbow
« Reply #5 on: July 09, 2007, 11:49:00 PM »
GT 600 Lites will work.
Dave from North Bend, Oregon

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: Carbon arrows for a 35# longbow
« Reply #6 on: July 09, 2007, 11:50:00 PM »
Any of the 600s should do the trick for you if carbon is where you want to go.
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline olderndirt

  • Trad Bowhunter
  • **
  • Posts: 51
Re: Carbon arrows for a 35# longbow
« Reply #7 on: July 10, 2007, 07:46:00 AM »
You might want to look at Beeman Energy.  They are available in 600, 690, and 780 spine.  They are the same shaft as Easton Redline with a lower straightness tolerance, which makes them far more economical.
I'm not lost ... I'm exploring alternative destinations

Offline eagle24

  • Trad Bowhunter
  • **
  • Posts: 499
Re: Carbon arrows for a 35# longbow
« Reply #8 on: July 10, 2007, 08:47:00 AM »
Quote
Originally posted by Bowchef:
GT Entrada 600
No question Entrada 600's will shoot.  I shot them from my 41# ACS-CX (29" draw) and have a good friend who was shooting them from a 35# long curve and now shoots them from a 31# Turkey Creek LB (he draws 25").  We were both shooting them full length.

I also think you could shoot full length Carbon Express Maxima 150's.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©