Author Topic: is there a 2blade out there that the point doesn't bend? (Read 813 times)

erictetterton · « **on:** October 13, 2011, 01:16:00 PM »

I have some 140gr Magnus 2blades and every time I hit something half way solid, the tip curls up and is useless. I am looking for a 125gr 2 blade that is tough as nails. Help please

Tajue17 · « **Reply #1 on:** October 13, 2011, 01:29:00 PM »

Yes ABOWYER,,I don't think you can bend 3/16's thick tanto pointed steel... also go into centaur's website and see vids of his 2-blade heads being shot into some concrete blocks with no tip damage.

I'm sure theres more,, AND it depends on what your hitting with it too.

BradLantz · « **Reply #2 on:** October 13, 2011, 01:32:00 PM »

I've never bent a Zwickey Delta - the reason I'm shooting them this fall.

Steel Force 225 single bevels aint nenver bent either and I've killed a couple of deer with them (50 grains more than my current arrows like or I'd be shooting them again)

ssoden · « **Reply #3 on:** October 13, 2011, 01:43:00 PM »

File the needle point off and they more than likely will not bend again. I've do this to all my heads .. never bent one sense.

TDHunter · « **Reply #4 on:** October 13, 2011, 01:53:00 PM »

x2 on file the tip. I do that with zwickey's and my magnus. I curled the tip on a moose a few years back and since then I've always filed the tip and no issues since.

atetterton · « **Reply #5 on:** October 13, 2011, 02:02:00 PM »

good advice on filing the tip down, could someone post a picture of their tip filed down if they have time? thanks

JimB · « **Reply #6 on:** October 13, 2011, 02:03:00 PM »

Check out STOS broadheads.They are similar in design,decent priced,ferrules are very true,have a tanto tip and are strong.I believe they have a 130.I've had that happen on a Magnus and it caused some problems.Filing any needle tip to a tanto will help a lot.Almost any needle tip could curl if it hits something hard enough.

anw0625 · « **Reply #7 on:** October 13, 2011, 02:14:00 PM »

Check out the muzzy 220. I shot one into a concrete wall and no bending. I got one to bend but had to smash it with a hammer.

Dave Lay · « **Reply #8 on:** October 13, 2011, 02:20:00 PM »

i have bent zwickeys but its no easy to do, i actually stuck one in a rock a few years ago !! i agree on knocking off the needle point,

SuperK · « **Reply #9 on:** October 13, 2011, 02:23:00 PM »

Check out the Ace Standard broadheads. I have hit a lot of junk and ain't bent a tip on one yet.

KentuckyTJ · « **Reply #10 on:** October 13, 2011, 02:25:00 PM »

briarsdad · « **Reply #11 on:** October 13, 2011, 02:33:00 PM »

Red Feather Archery has come out with a single bevel 2 blade that is tough as any I've seen. It is called the Razorhawk and is available in 100, 125 and 150 GR. They cost a lot less than some of the other single bevel heads out there. The guy that owns Red Feather is a member on here and a super nice guy that is willing to talk personally to any of his customers.

Jason R. Wesbrock · « **Reply #12 on:** October 13, 2011, 02:35:00 PM »

Quote

Originally posted by erictetterton:
I am looking for a 125gr 2 blade that is tough as nails. Help please

Ace Standard.

wapiti792 · « **Reply #13 on:** October 13, 2011, 02:37:00 PM »

Ace Standard x 2...bombproof. You'll break the arra before you mess up the head.

BEN · « **Reply #14 on:** October 13, 2011, 03:32:00 PM »

Magnus STINGER-----never bent one, and I have put a few in the dirt

Jerry Jeffer · « **Reply #15 on:** October 13, 2011, 03:33:00 PM »

I find most anything in the 125 gr to be weak. Most all of the heavier BHs mentioned are satisfactory. The single bevels seem to be tougher. I highly recommend abowyers.

dave19113 · « **Reply #16 on:** October 13, 2011, 04:32:00 PM »

Grizzlys....Concordes

Night Wing · « **Reply #17 on:** October 13, 2011, 05:08:00 PM »

Another vote for a STOS broadhead since the tip doesn't curl and STOS come in 130, 145 and 160 grains.

Stiks-n-Strings · « **Reply #18 on:** October 13, 2011, 05:12:00 PM »

ABOWYER'S all the way.

Javi · « **Reply #19 on:** October 13, 2011, 05:18:00 PM »

ACE Std..


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: is there a 2blade out there that the point doesn't bend? (Read 813 times)

Users currently browsing this topic: