Footing experiment. FYI

[Earl Jeff]

I was footing some new Victory shafts I recently purchased. And since there been some talk lately about how the footing might effect spine. I thought I would try a little experiment. I checked the spine on a new shafts and it spined .355ths deflection. I then slid a aluminum footing on the shaft 1" @ a time and checked the spine. I was suprized to see that there was no change in spine till I got to 10" of footing and even then the deflection only decreased by 5ths. Between 11 and 12 " the amount of deflection started to decrease significantly that one inch increased the spine by 15ths. Just thought someone might be interested.  
 
 

[Bjorn]

Virtually all the bending in an arrow takes place in the middle. The weight of the footing may have a small effect on spine as well.

[SlowBowinMO]

That is what I would expect, thank you for conducting a good experiment to eliminate doubt.

[Earl Jeff]

Bjorn you are exactlly right.

[Jack Guard]

Love it.   Thanks for posting this.

Been trying to talk a few non-Gang folks into this concept and this will help.

[Earl Jeff]

Jack have you shot any carbons with these long footings on them  I haven't yet just wondering.

[Earl Jeff]

I have a update.

[JimB]

But if the long footing is epoxied in place,does that change anything?

[Earl Jeff]

Jim read carbon footing update.