3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Bear grizzly for a 30" draw?  (Read 2151 times)

Offline shamus

  • Trad Bowhunter
  • **
  • Posts: 354
Bear grizzly for a 30" draw?
« on: July 11, 2007, 07:52:00 AM »
after searching the threads to no avail, I'm posting this question:

Can a Bear Grizzly (58" length) be safely and comfortably shot at a 30" draw length?

Offline woodchucker

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5435
Re: Bear grizzly for a 30" draw?
« Reply #1 on: July 11, 2007, 08:02:00 AM »
Yes!!!!!

When the older Grizzlys were advertized in the  Bear catalog draw weights were at the "standard" 28" and the draw limit was "unlimited"

If you have an old bow that has NOT ben shot in a long time.....DO NOT just haul it right back to 30"!!!!!(after all some of these bows are 30-40 years old) Work the limbs a little at a time over a couple days untill you get it back to 30"

Also,after you string the bow,it doesn't hurt to give it a good "flexing".

Good Luck!!!!! Good Shooting!!!!!
I only shoot WOOD arrows... My kid makes them, fast as I can break them!

There is a fine line between Hunting, & Sitting there looking Stupid...

May The Great Spirit Guide Your Arrows..... Happy Hunting!!!

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Bear grizzly for a 30" draw?
« Reply #2 on: July 11, 2007, 08:06:00 AM »
Safely, yes.  Comfortably, for me no.  My draw was a hair over 30" when I was shooting a newer grizzly.  I didn't like the finger pinch - a few shots a day wasn't a problem, but after shooting any significant amount my fingers started to get a little sore.
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline OzarkRamblr

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 446
Re: Bear grizzly for a 30" draw?
« Reply #3 on: July 11, 2007, 08:10:00 AM »
Hey Shamus my go to bow is a 58" Super Grizzly by Bear. I also have a 30" draw, it's smooth and you can't feel it stack at all. Like Jeremy said sometimes the longer draws will cause some finger pinch but mine doesn't.
"A friend of mine said that I'm lucky, I told him luck has nothing to do with the life I chose, we choose the life we have and don't have, so choose wisely"...Kingwouldbe

Words to live by.

TGMM Family of the Bow

Offline shamus

  • Trad Bowhunter
  • **
  • Posts: 354
Re: Bear grizzly for a 30" draw?
« Reply #4 on: July 11, 2007, 09:03:00 AM »
next question: what will a 45#@28" grizzly weigh at 30"?

Offline dad

  • Trad Bowhunter
  • **
  • Posts: 327
Re: Bear grizzly for a 30" draw?
« Reply #5 on: July 11, 2007, 09:10:00 AM »
Add 2.5 per inch. The bow will be 50# at 30" draw.

Offline eddiejclayton

  • Trad Bowhunter
  • **
  • Posts: 20
Re: Bear grizzly for a 30" draw?
« Reply #6 on: July 11, 2007, 09:12:00 AM »
No wonder my 55# dreamcatcher is a little heavy, my draw is just over 31".

Offline shamus

  • Trad Bowhunter
  • **
  • Posts: 354
Re: Bear grizzly for a 30" draw?
« Reply #7 on: July 12, 2007, 08:35:00 AM »
Quote
Add 2.5 per inch. The bow will be 50# at 30" draw.  
that would be perfect..

Offline eddiejclayton

  • Trad Bowhunter
  • **
  • Posts: 20
Re: Bear grizzly for a 30" draw?
« Reply #8 on: July 12, 2007, 09:29:00 AM »
Quote
Originally posted by dad:
Add 2.5 per inch. The bow will be 50# at 30" draw.
So my 55# dreamcatcher is really pulling about 62.5# @ my 31" draw?   :eek:

No wonder my left shoulder is hurting.  :(

Offline George D. Stout

  • Trad Bowhunter
  • **
  • Posts: 3467
Re: Bear grizzly for a 30" draw?
« Reply #9 on: July 12, 2007, 10:00:00 AM »
Hello Eddiejclayton,  How about that my friend.  It may even be more, say 64 pounds.  You can almost bet on 3 pound per inch on 58 to 60 inch bows, after that 28" mark.  By the way, it's been that way since the first recurve was made. 8^).

The Grizzly is very smooth, with no stack to nearly 31 inches.

Offline eddiejclayton

  • Trad Bowhunter
  • **
  • Posts: 20
Re: Bear grizzly for a 30" draw?
« Reply #10 on: July 12, 2007, 10:47:00 AM »
@George

It certainly explains some things for me.  I was starting to think that I'm a little girly man or something.  I've only been shooting for a few weeks and usually use a 30#@28 (which is apparently 37.5@31)  bow most of the time.  I also picked up a 45#@28 that I'm going to give a try.

I learn something new on here everday.....and I apparently have a lot more to learn.   :(

Offline Woodduck

  • Trad Bowhunter
  • **
  • Posts: 686
Re: Bear grizzly for a 30" draw?
« Reply #11 on: July 12, 2007, 01:56:00 PM »
It might FEEL like stack but put it on a scale and see if it's increasing more per inch.

It might just be you feel honest weight.  :bigsmyl:  

I have an old Ben Pearson Hunter that I 'felt' was stacking at my 29" draw but the scale showed the same increase in weight per inch...so it wasn't stacking.
Happy trails....   ('till we meet again, Dale Evans Rogers)
>>>--a kindred spirit--->     (got that from Fred Anderson)

North Carolina Bowhunters Association

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©