Author Topic: aluminums? (Read 688 times)

3Feathers · « **on:** October 29, 2011, 09:32:00 AM »

How many still use aluminums for there hunting arrows?What is your set-up and arrow weight?

Dave Paradowski · « **Reply #1 on:** October 29, 2011, 09:45:00 AM »

Holm-Made Osprey, 60", 44# @ 28"
29" 1916's, 3-4" shield feathers
125gr.two blade Magnus Stingers
Total weight, 500grs.
DaveP

stagetek · « **Reply #2 on:** October 29, 2011, 10:16:00 AM »

Bear Super K.'s and Predators. 48 - 51 lbs. 31" 2018's, Three 5" fletch. 125gr. Snuffers or Magnus II's.

Widow's Son · « **Reply #3 on:** October 29, 2011, 10:39:00 AM »

I still shoot aluminum's out of my Black Widow. 46# @ 28". 28 1/2" 2020's, three 5" fletch, 125gr Zwickey Eskimos. I've been out of traditional archery for a while and didn't realize that almost all Easton shafts now used the uni-bushing system. I'm not a big fan of this system but it seems that they still offer the traditional nock taper on their legacy shafts.

stujay · « **Reply #4 on:** October 29, 2011, 11:14:00 AM »

#45 ILF longbow setup, 29" 2016"s 150 gr tips. Arrow 505gr. Broadheads Magnus Stinger 2 or 4 blade (150 gr). I have carbon arrows also but prefer the aluminum's. My 2016's are easton's xx75 camo hunters and legacy's. My preference is the Legacy's.

BOWMARKS · « **Reply #5 on:** October 29, 2011, 04:17:00 PM »

Thats all I shoot #43 Morrison R/C.
28" 1918's shaft.
175gr VPA broadhead
560gr total shaft.

dave19113 · « **Reply #6 on:** October 29, 2011, 04:23:00 PM »

Buffalo Bow 67 @ 27

2018's cut to 28", 250 up front 3 5" feathers 640 gr

2219 cut to 28" 300 up front, 3 5" feathers

Buffalow Bow 58# @ 26"

2018's cut to 28" 250 up front, 3 5" feathers 640gr

ksbowman · « **Reply #7 on:** October 29, 2011, 06:04:00 PM »

57# to 64# @ 29 1/4" depending on bow. Arrows cut to 30 1/4". Zwickey Eskimos 165 gr. w/insert. 2215's total weight 565 gr. arrow.

bear1336 · « **Reply #8 on:** October 29, 2011, 06:07:00 PM »

Bear T/D A riser #1 limbs 44# 1916 @ 28in 100gr magnus

rdoggsilva · « **Reply #9 on:** October 30, 2011, 01:56:00 AM »

Samick Sage 45# @ 28" shoot at 28.5". Arrow length 29.5. 2117 with 175gr head.

barredfeather · « **Reply #10 on:** October 30, 2011, 08:16:00 AM »

Rose Oak King Panther, 47# @ 28", 2018 Daugherty Super Naturals, 28 1/2" with a 160 grain Ace Standard, and 3, 5 1/2" feathers. Hair under 600 grains including adapter and insert.

Jerry

jimneye · « **Reply #11 on:** October 30, 2011, 08:16:00 AM »

28" 2117 with 175 up front out of a 26 lb PSA II

SL · « **Reply #12 on:** October 30, 2011, 08:32:00 AM »

29" 2219's with 175 grains from a 64lb @ 27 inch brack quest. Not sure how heavy.
SL

dirtguy · « **Reply #13 on:** October 30, 2011, 08:42:00 AM »

45# draw

29" 2016s xx75 with Magnus stinger 125s.

Total arrow weight at about 440 grains

Three Finger · « **Reply #14 on:** October 30, 2011, 09:35:00 AM »

48#@28 recurve, with 2114 cut to 28in with 200g with inserts Grizzlies up front.

Night Wing · « **Reply #15 on:** October 30, 2011, 05:02:00 PM »

I've always used aluminums when shooting trad bows. There easy to tune to a bow.

My present aluminum arrows I'm shooting are in my signature.

Covey · « **Reply #16 on:** October 30, 2011, 05:09:00 PM »

54# at 28" Silvertip I draw to a little over 30". I shoot 2117's full length with a 125 muzzy. I prefer aluminum, fly good and there cheap!

Jason

Downtime · « **Reply #17 on:** October 30, 2011, 06:19:00 PM »

2016 30" 125 ace standard, glue in adapter

45# recurves, draw 29.25'

Outwest · « **Reply #18 on:** October 30, 2011, 07:32:00 PM »

2117 31" 125 grain head. I draw 29" they work in all of my bows 52# to 58#

JDunlap · « **Reply #19 on:** October 30, 2011, 10:02:00 PM »

2213 gg, 29.5" with 3-5" feathers, 200gr two blades; shooting out of a [email protected]" Sandy Biles recurve and a Don Dow Stik; Arrow weight 550grains. The best flight I've been able to find.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: aluminums? (Read 688 times)

Users currently browsing this topic: