What do you think?

[JamesKerr]

I shoot a 55@28" Tomahawk diamond series ss longbow with trad only carbon shafts spined for 340 with a 100 grain brass insert and a 175 grain point. This seems to shoot well for me and I get good flight. My only thing is after reading some post on here I think I may be overspined.

[McDave]

What is the length of your arrows and what is your draw length?

[Rob W.]

Sometimes reading can be dangerous.


Rob

[TDHunter]

I shoot the a 55lb @28 Griffin with 340 spined arrows with the same insert and tip as you. I draw 29" and my arrows are 30.5"

[stevewills]

some bows like stiffer arrows...my setup is bw pma2 56@28 i draw 28 with a 340 29 inch arrow and 225 grain bh...perfect flight

[JamesKerr]

My arrow length is 30 & 1/4th inches and I pull a full 28" draw.

[JimB]

You most likely need about 300 grs of point weight in addition to your 100 gr adapter.You need to bare shaft and broadhead test to be sure.

[Friend]

Easy to prove to yourself. If a 175 grain field pt and a 175 gn BH are both on the 'mark' at both ~3 yards and ~25 yards, then you are golden.

[Big Ed]

Shoot what works for you! Split finger or three under, glove or tab, form issues? Many contributing factors.

[Looper]

Like they said, as long as your broadheads hit where you're looking, I wouldn't change anything.

[JamesKerr]

My arrow length is 30 & 1/4th inches and I pull a full 28" draw.

[JamesKerr]

I have bareshafted using O.L. Adcocks method and my shafts hit exactly where I look and group with my fletched arrows. My broadheads also group with my field tips (bareshaft or fletched)

[cbCrow]

I practice the old adage" If the damn thing ain't broke, Don't Fix It!!

[KodiakMag]

Originally posted by cbCrow:
I practice the old adage" If the damn thing ain't broke, Don't Fix It!!

++++++++1

If your arrows are hitting where you want, focus on hunting!

[bornagainbowhunter]

Originally posted by JamesKerr:
This seems to shoot well for me and I get good flight.  

'Nuff said... Stop worrying.

God Bless,
Nathan

[Pat B.]

Next time you're around someone with 400's give 'em a try!  Perhaps they'd better, perhaps you're right on with your 340's..  There is a possibility that you're overspined, IMO..
But if your setup is working, hey, have fun !

[wtpops]

Originally posted by JamesKerr:
I have bareshafted using O.L. Adcocks method and my shafts hit exactly where I look and group with my fletched arrows. My broadheads also group with my field tips (bareshaft or fletched)

If this is the case dont touch it.

[JamesKerr]

Thanks for all the replies guys I thought I was right on when I ordered these shafts and tuned them.